Reference Guide

Table Of Contents
Table 11. IPProtocolEndpoint (continued)
Property Description
5 = No Change Indicates that no transition is in
progress.
6 = Offline
7 = Test
8 = Defer
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not Applicable Indicates that the implementation
does not support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the
element is in the process of transitioning.
DCIM_ImprovementProgramConsent
Table 12. ImprovementProgramConsent
Property Description
CurrentValue CurrentValue displays the User's Consent to participate in the
Dell Command | Monitor improvement program.
NOTE: Improvement Program is available for DCM 10.2.1
x64 bit version only.
OverrideImprovementProgramConsent (Method)
This method sets the User consent for the Dell Command |
Monitor improvement program.
Parameters and the current value:
0 - I don't want to participate in the program
1 - I want to participate in the program
NOTE: Default Value is 0 (By default, you are not
enrolled in Improvement Program).
Return Values:
A return code of 0 indicates that the user consent was
updated successfully
A return code of 1 indicates that the user consent was not
updated successfully
DCIM_ControllerView
Table 13. ControllerView
Property Description
BusType
The property represents the type of the PCI bus.
Possible values are:
0 =Unknown
3 = PCI Bus
4 = PCMCIA Bus
0x8000 = DMTF Reserved
0xffff = Vendor Reserved
ControllerFirmwareVersion
This property represents the firmware version.
56 Dell Command | Monitor 10.2.1 classes and properties