Reference Guide

Table 7. DesktopMonitor (continued)
Property Description
● 6 = Enabled but Offline — Indicates that the element may
be completing commands, and drops any new requests.
● 7 = In Test — Indicates that the element is in a test state.
● 8 = Deferred — Indicates that the element may be
completing commands, but queues any new requests.
● 9 = Quiesce — Indicates that the element is enabled but in
a restricted mode.
● 10 = Starting — Indicates that the element is in the
process of going to an Enabled state. New requests are
queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
FrequencyH
This property is a horizontal synchronization signal frequency
in Hz as determined by the display.
FrequencyV
This property is a vertical synchronization signal frequency in
Hz as determined by the display.
HealthState
Indicates the current health of the element. This attribute
expresses the health of this element but not necessarily that
of its subcomponents.
Possible values are:
● 0 = Unknown — The implementation cannot report on
HealthState now. DMTF has reserved the unused portion
of the continuum for additional HealthStates in the future.
● 5 = OK — The element is fully functional and is operating
within normal operational parameters and without error.
● 10 = Degraded/Warning — The element is in working
order and all functionality is provided. However, the
element is not working to the best of its abilities. For
example, the element may not be operating at optimal
performance or it may be reporting recoverable errors.
● 15 = Minor failure — All functionality is available but some
may be degraded.
● 20 = Major failure — The element is failing. It is possible
that some or all of the functionality of this component is
degraded or not working.
● 25 = Critical failure — The element is nonfunctional and
recovery may not be possible.
● 30 = Non-recoverable error — The element has failed, and
recovery is not possible. All functionality provided by this
element has been lost.
● .. = DMTF Reserved
IdentifyingDescriptions
An array of free-form strings providing explanations and
details behind the entries in the OtherIdentifyingInfo array.
Each entry of this array is related to the entry in
OtherIdentifyingInfo that is located at the same index.
InputAnalog
Input is an analog video signal interface.
InputDigital
Input is a digital video signal interface.
InputDisplayPort
DisplayPort is supported.
InputDVI
DVI is supported.
32 Dell Command | Monitor 10.2.1 classes and properties