Reference Guide

Table Of Contents
Table 150. Events Polled by Dell Command | Monitor (continued)
Dell Command | Monitor Event
(Windows event log Number)
Description
MemorySizeIncreased (2032)
The memory size has been increased.
MemorySizeDecreased (2033)
The memory size has been decreased.
DiskCapacity (2034)
In the current version, two user-defined thresholds are used. An event is generated
only when the conditions of both thresholds are met. The first threshold, expressed
as an absolute value in megabytes, specifies the size of the hard-disk drive to be
monitored. Hard-disk drives with a capacity smaller than the specified size are
ignored. The second threshold is expressed as a percentage of the hard-disk drive
size. An event is generated when the available free space on one of the monitored
hard-disk drives falls below this percentage.
NumberOfProcessorsIncreased
(2035)
Number of processors on the system has increased.
NumberOfProcessorsDecreased
(2036)
A processor has been removed.
HDD Smart Failure(2037)
A hard-disk drive condition has occurred that may eventually lead to a hard-disk
drive failure.
Error message is displayed when the current value exceeds the threshold value.
Warning message is displayed when the current value exceeds the custom
threshold value.
NOTE: Extended Error and Warning messages are supported only on Embedded
box personal computer 3000/5000.
DiskSizeIncreased (2038)
The size of at least one hard-disk drive has increased.
DiskSizeDecreased (2039)
The size of at least one hard-disk drive has decreased.
Alerts in Dell Command | Monitor 10.2.1 319