Reference Guide

Table Of Contents
Table 149. BIOS settings supported in Dell Command | Monitor 10.2.1 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
RS485
Serial Port 4
Configures the 4th serial port of the system.
Possible values are:
Disable Disables the 4th serial port.
Auto Enables the auto-configuration of the 4th serial
port.
RS232
RS422
RS485
Microsoft Windows,
Linux
Serial Port 5
Configures the systems 5th serial port.
Possible values are:
Disable Disables the 5th serial port.
Auto Enables the auto-configuration of the 5th serial
port.
Microsoft Windows,
Linux
Serial Port 6
Configures the 6th serial port of the system.
Possible values are:
Disable Disables the 6th serial port.
Auto Enables the auto-configuration of the 6th serial
port.
Microsoft Windows,
Linux
SERR DMI Message
Enables or Disables SERR DMI Messages.
Possible values are:
Off
On
Microsoft Windows,
Linux
Service OS Clear
Deletes the service OS non-volatile region.
Possible values are:
Enable - Deletes the service OS non-volatile region and
changes the BIOS setting status to Disabled.
Disable - Does not delete the service OS non-volatile
region.
Microsoft Windows,
Linux
Set CMOS To Default
Request or do not request a default of CMOS values on the
next boot.
Possible values are:
Disable
Enable
Microsoft Windows
SFP
Enables or disables Small Formfactor Pluggable (SFP)
device.
Possible values are:
Disable Disables the SFP device.
Enable Enables the SFP device.
Enable With PXE Enables the SFP device with PXE
support.
NOTE: SFP device is listed as boot device only if this
BIOS setting is enabled with PXE.
Microsoft Windows,
Linux
BIOS settings supported in Dell Command | Monitor 10.2.1 299