Reference Guide

Table Of Contents
Table 149. BIOS settings supported in Dell Command | Monitor 10.2.1 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Power Button
Enables, disables, or Partially disables the power button.
Possible values are:
Disable
Enable
Partial disable
Microsoft Windows,
Linux
Power Management
This property defines the power management settings.
Possible values are:
Disable
Min
Regular
Max
Microsoft Windows
Power Warning
Enables or disables performance limitation messages based
on power supply capacity.
Possible values are:
Disable
Enable
Microsoft Windows,
Linux
Power On Lid Open
Sets the Power On Lid Open feature.
Possible values:
Enable - If the feature is set to enable, the system
powers up from the off state whenever the lid is
opened. This system powers on when powered either by
the AC adapter or the system battery.
Disable - If this feature is set to disable, the system
does not power up from the off state whenever the lid
is opened.
Microsoft Windows,
Linux
Power Off Intel 8260 When Engaging
Stealth Mode
Enables or disables the Power Off Intel 8260 When
Engaging Stealth Mode feature.
Possible values are:
Enabled Disconnects power from the Intel 8260
Wireless NIC when the Stealth Mode is enabled.
Disabled Does not disconnect power from the Intel
8260 Wireless NIC when the Stealth Mode is enabled.
NOTE: Disabling Stealth Mode does not automatically
restore the power or functionality of the card until the
next complete boot. This non-standard mode is
available as an option for Stealth Mode control of the
Intel 8260 card for the following use cases: pre-boot
applications, Linux OS, or Windows OS without Dell
recommended drivers.
Microsoft Windows,
Linux
Power Usage Mode Sets the system power usage modes.
Possible values:
Power Saver - This mode reduces processor sustained
power to benefit battery life depending on usage cases.
This mode may reduce system performance.
Microsoft Windows,
Linux
BIOS settings supported in Dell Command | Monitor 10.2.1 291