Reference Guide

Table 149. BIOS settings supported in Dell Command | Monitor 10.2.1 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
● Peak Shift Fri ChargeStartMin
Peak Shift Sat
Configures the power usage configuration for Saturday.
Possible values are:
● 0 — 23 — Start Hour
● 0 — 59 — Start Minute
● 0 — 23 — End Hour
● 0 — 59 — End Minute
● 0 — 23 — Charge Start Hour
● 0 — 59 — Charge Start Min
BIOS setting names for Set operation:
● Peak Shift Sat StartHour
● Peak Shift Sat StartMin
● Peak Shift Sat EndHour
● Peak Shift Sat EndMin
● Peak Shift Sat ChargeStartHour
● Peak Shift Sat ChargeStartMin
Microsoft Windows
Peak Shift Battery Threshold
If Battery stays above the threshold system will run from
battery even if AC is attached during the times as
configured in Start/End/Charge Start time.
Possible value is based on user input.
● >= 15% Possible Value <= 100%.
BIOS setting name for Set operation:
● Peak Shift Battery Threshold
Microsoft Windows,
Linux
Pointing Device
This property defines whether the built-in pointing device
port is enabled or disabled.
Possible values are:
● External serial
● External PS2
● SW TPAD
Microsoft Windows,
Linux
POST Help Desk Key
Enables or Disables POST MEBx Key.
Possible values are:
● On
● Off
Microsoft Windows
POST MEBx Key Setting
Enables or Disables POST MEBx Key.
Possible values are:
● On
● Off
Microsoft Windows,
Linux
POST Testing
Enables or Disables fast booting.
Possible values are:
● Min
● Max
● Auto
Microsoft Windows,
Linux
290 BIOS settings supported in Dell Command | Monitor 10.2.1