Reference Guide

Table 149. BIOS settings supported in Dell Command | Monitor 10.2.1 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
● Peak Shift Sun StartHour
● Peak Shift Sun StartMin
● Peak Shift Sun EndHour
● Peak Shift Sun EndMin
● Peak Shift Sun ChargeStartHour
● Peak Shift Sun ChargeStartMin
NOTE: To use Peak Shift mode, the values of Peak
Shift Start Time, Peak Shift End Time, Peak Shift
Charge Start Time, and Peak Shift battery threshold are
necessary.
NOTE: It is recommended to input values as per the
following: Start Time <= End Time <= Charge
Start Time. Dell Command | Monitor can set the
out-of-range values. BIOS behavior is unknown at this
point of time for such values.
NOTE: The values defined for Minute field are 0, 15, 30
and 45. In case you set any other value, the value is
round to the lower defined value.
Peak Shift Mon
Cconfigures the power usage configuration for Monday.
Possible values are:
● 0 — 23 — Start Hour
● 0 — 59 — Start Minute
● 0 — 23 — End Hour
● 0 — 59 — End Minute
● 0 — 23 — Charge Start Hour
● 0 — 59 — Charge Start Min
BIOS setting names for Set operation:
● Peak Shift Mon StartHour
● Peak Shift Mon StartMin
● Peak Shift Mon EndHour
● Peak Shift Mon EndMin
● Peak Shift Mon ChargeStartHour
● Peak Shift Mon ChargeStartMin
Microsoft Windows
Peak Shift Tue
Configures the power usage configuration for Tuesday.
Possible values are:
● 0 – 23 — Start Hour
● 0 — 59 — Start Minute
● 0 — 23 — End Hour
● 0 — 59 — End Minute
● 0 — 23 — Charge Start Hour
● 0 — 59 — Charge Start Min
BIOS setting names for Set operation:
● Peak Shift Tue StartHour
● Peak Shift Tue StartMin
● Peak Shift Tue EndHour
● Peak Shift Tue EndMin
Microsoft Windows
288 BIOS settings supported in Dell Command | Monitor 10.2.1