Reference Guide

Table Of Contents
Table 149. BIOS settings supported in Dell Command | Monitor 10.2.1 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Enable
PCIE0_CPU1
Enables or Disables the PCIE0_CPU1 Card.
Possible values are: 1,2
Disable
Enable
Microsoft Windows,
Linux
PCIE1_CPU1
Enables or Disables the PCIE1_CPU1 Card.
Possible values are: 1,2
Disable
Enable
Microsoft Windows,
Linux
PCMCIA
Enables or disables the PCMCIA device slot.
Possible values are:
Disable
Enable
Microsoft Windows,
Linux
Pen Missing Indication
Enables or disables the Missing Pen Indication.
Possible values are:
Disable
Enable
Microsoft Windows
Pen Resume On
Enables or disables the Resume On Pen setting.
Possible values are:
Disable
Enable
Microsoft Windows
Peak Shift
Peak Shift can be used to minimize AC consumption during
peak power times of day. For each weekday listed, set a
start and end time to run in Peak Shift mode. During these
times the system will run from the battery even if the AC is
attached as long as the battery stays above the threshold
specified in the Battery threshold field. After the end time
specified the system will run from AC if attached but will
not charge the battery. The system will again function
normally using AC and recharging the battery after the
Charge Start time is specified.
Possible values are:
1 Disable
2 Enable
Microsoft Windows,
Linux
Peak Shift Sun
Cconfigures the power usage configuration for Sunday.
Possible values are:
0 23 Start Hour
0 59 Start Minute
0 23 End Hour
0 59 End Minute
0 23 Charge Start Hour
0 59 Charge Start Min
BIOS setting names for Set operation:
Microsoft Windows
BIOS settings supported in Dell Command | Monitor 10.2.1 287