Reference Guide

Table Of Contents
Table 149. BIOS settings supported in Dell Command | Monitor 10.2.1 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
Fan Speed Auto Level on Cpu Zone
Sets the system to Fan Speed Auto Level on Cpu Zone.
Possible values are: 0 100
Minimum Value
Minimum Value
Microsoft Windows,
Linux
Fan Speed Auto Level on Flex Bay
Zone
Sets the system to Fan Speed Auto Level on Flex Bay Zone.
Possible values are: 0 100
Minimum Value
Minimum Value
Microsoft Windows,
Linux
Fan Speed Auto Level on Upper PCIe
Zone
Sets the system to Fan Speed Auto Level on Upper Pcie
Zone.
Possible values are: 0 100
Minimum Value
Minimum Value
Microsoft Windows,
Linux
Enable Fingerprint Reader Device
Enables or disables the Fingerprint Reader device.
Possible values are:
Enable - Fingerprint Reader device is enabled.
Disable - Fingerprint Reader device is disabled.
Microsoft Windows,
Linux
Enable Fingerprint Reader Single Sign
On
Enables or disables the Fingerprint Reader Single Sign On
device.
Possible values are:
Enable - Fingerprint Reader Single Sign On device is
enabled.
Disable - Fingerprint Reader Single Sign On device is
disabled.
Microsoft Windows,
Linux
Dell Reliable Memory Technology
Configures the system to detect and correct the software
errors in a block of RAM. When enabled, the system
detects and corrects the software errors.
Possible values are:
Disable
Enable
Microsoft Windows
Fault Tolerant Memory Log Clear
Enables or disables the Fault Tolerant Memory Log Clear
option.
Possible values are:
Enabled System clears fault tolerant memory log
during the next boot.
Disabled Fault Tolerant Memory Log Clear option will
be disabled, and no action will be taken during the next
boot.
NOTE: Fault Tolerant Memory Log Clear option will be
reset to disabled state after log gets cleared.
Microsoft Windows,
Linux
Fn Lock
Controls the behavior of the dual-function keys (<F1>
<F12>), when <Fn> key is pressed.
Possible values are:
Microsoft Windows,
Linux
270 BIOS settings supported in Dell Command | Monitor 10.2.1