Reference Guide

Table Of Contents
Table 149. BIOS settings supported in Dell Command | Monitor 10.2.1 (continued)
BIOS Settings Name Description Supported
Operating
System(s)
the primary operating system fails to boot consecutively
the count of boot failure is greater than or equal to the
value of the Auto OS Recovery threshold setup option
the SupportAssist OS Recovery option is enabled
Possible values are: 0 to 3
NOTE: If the Auto OS Recovery threshold is set to 0,
then all automatic boot flow for SupportAssist System
Resolution console and for Dell OS Recovery Tool is
disabled.
Auto Switch Enable, Disable
Possible values are: 1,2
Microsoft Windows,
Linux
Auto Wake Period
Defines the time in minutes after which the system should
automatically wake up from Standby, Hibernate, or
Switched off mode.
Possible values are: 0, integers ranging from 1 to 254
NOTE: The system wakes up from Sleep, Hibernate, or
Switched off mode only if the Auto On option is enabled
for everyday of the week.
Microsoft Windows,
Linux
BIOS Auto Recovery
Enables or disables the BIOS auto recovery feature.
Possible values are:
Enabled If BIOS corruption is detected, the system
automatically recovers BIOS without any user
interaction.
Disabled Disables BIOS auto recovery feature.
Microsoft Windows,
Linux
Back Camera
Enables or disables the rearward facing camera.
Possible values are:
Disable Disables the rearward facing camera.
Enable Enables the rearward facing camera.
Microsoft Windows,
Linux
Battery Slice Charge Configuration
Configures the battery slice charging
Possible values are:
1 - Adaptive
2 - Standard
3- Express
4- PrimAcUse
5- Custom
Microsoft Windows,
Linux
BIOS Connect
Enables or disables the BIOS Connect feature.
Possible values are:
Enable
Disable
Microsoft Windows,
Linux
BIOS Connect Activation
Configures the state of the available BiosConnect boot
paths.
Possible values are:
Microsoft Windows,
Linux
260 BIOS settings supported in Dell Command | Monitor 10.2.1