Reference Guide
Table Of Contents
- Dell Command | Monitor Version 10.2.1 Reference Guide
- Introduction for Dell Command | Monitor 10.2.1
- Dell Command | Monitor 10.2.1 Namespaces
- Profiles for Dell Command | Monitor 10.2.1
- Classes for Dell Command | Monitor 10.2.1
- Dell Command | Monitor 10.2.1 classes and properties
- Classes supported for systems running Linux
- Classes supported for systems running Windows
- DCIM_AlertIndication
- DCIM_ApplicationProxySetting
- DCIM_BaseMetricDefinition
- DCIM_Card
- DCIM_Chassis
- DCIM_Chip
- DCIM_DesktopMonitor
- DCIM_DHCPProtocolEndpoint
- DCIM_EthernetPort
- DCIM_FlatPanel
- DCIM_IPProtocolEndpoint
- DCIM_ImprovementProgramConsent
- DCIM_ControllerView
- DCIM_PhysicalDiskView
- DCIM_VirtualDiskView
- DCIM_PhysicalMemory
- DCIM_PhysicalPackage
- DCIM_ParallelPort
- DCIM_RemoteServiceAccessPoint
- DCIM_Slot
- DCIM_SerialPort
- DCIM_USBPort
- DCIM_Memory
- DCIM_PCIDevice
- DCIM_DisplayController
- DCIM_Fan
- DCIM_IndicatorLED
- DCIM_PowerSupply
- DCIM_Battery
- DCIM_Processor
- DCIM_NumericSensor
- DCIM_Sensor
- DCIM_DeviceBay
- DCIM_VideoHead
- DCIM_Button
- DCIM_LCDPanel
- DCIM_NetworkPortConfigurationService
- DCIM_TimeService
- DCIM_AccountManagementService
- DCIM_RoleBasedAuthorizationService
- DCIM_PowerManagementService
- DCIM_BootService
- DCIM_IPConfigurationService
- DCIM_PowerUtilizationManagementService
- DCIM_BIOSService
- DCIM_SoftwareInstallationService
- DCIM_ComputerSystem
- DCIM_RecordLog
- DCIM_OperatingSystem
- DCIM_SoftwareIdentity
- DCIM_BIOSElement
- DCIM_ConcreteJob
- DCIM_BootSourceSetting
- DCIM_BootConfigSetting
- DCIM_IPAssignmentSettingData
- DCIM_PowerAllocationSettingData
- DCIM_AssetAcquisition
- DCIM_AssetExtendedWarrantyInformation
- DCIM_AssetOwnerInformation
- DCIM_AssetSupportInformation
- DCIM_AssetWarrantyInformation
- DCIM_AssetSystemInformation
- DCIM_AMTSettings
- DCIM_ASFSettings
- DCIM_VProSettings
- DCIM_AlertIndicationSettingData
- DCIM_HDDAlertIndicationSettingData
- DCIM_BaseMetricValue
- DCIM_LogEntry
- DCIM_IndicatorLEDCapabilities
- DCIM_ProcessorCapabilities
- DCIM_AccountManagementCapabilities
- DCIM_BootServiceCapabilities
- DCIM_PlatformWatchdogServiceCapabilities
- DCIM_DHCPCapabilities
- DCIM_PowerUtilizationManagementCapabilities
- DCIM_EnabledLogicalElementCapabilities
- DCIM_ButtonCapabilities
- DCIM_LCDPanelCapabilities
- DCIM_PowerManagementCapabilities
- DCIM_PhysicalAssetCapabilities
- DCIM_RoleBasedManagementCapabilities
- DCIM_AllocationCapabilities
- DCIM_BIOSServiceCapabilities
- DCIM_SoftwareInstallationServiceCapabilities
- DCIM_ConcreteCollection
- DCIM_RedundancySet
- DCIM_Role
- DCIM_IndicationSettingCollection
- DCIM_ConfigurationCapacity
- DCIM_Location
- DCIM_BIOSEnumeration
- DCIM_BIOSPassword
- DCIM_BIOSString
- DCIM_MemoryError
- DCIM_IdentityContext
- DCIM_OrderedComponent
- DCIM_Container
- DCIM_ConcreteComponent
- DCIM_SystemDevice
- DCIM_AccountOnSystem
- DCIM_InstalledOS
- DCIM_SystemBIOS
- DCIM_SystemComponent
- DCIM_SettingsDefineCapabilities
- DCIM_DeviceSAPImplementation
- DCIM_HostedAccessPoint
- DCIM_HostedCollection
- DCIM_HostedService
- DCIM_VideoHeadOnController
- DCIM_SAPSAPDependency
- DCIM_ReferencedProfile
- DCIM_MetricDefForME
- DCIM_MetricForME
- DCIM_MetricInstance
- DCIM_ElementInConnector
- DCIM_Docked
- DCIM_ConcreteDependency
- DCIM_Realizes
- DCIM_ComputerSystemPackage
- DCIM_RunningOS
- DCIM_UseOfLog
- DCIM_AssociatedIndicatorLED
- DCIM_AssociatedCacheMemory
- DCIM_AssociatedSensor
- DCIM_RemoteAccessAvailableToElement
- DCIM_ServiceServiceDependency
- DCIM_DeviceConnection
- DCIM_ElementSoftwareIdentity
- DCIM_ElementCapabilities
- DCIM_ElementSettingData
- DCIM_OrderedMemberOfCollection
- DCIM_MemberOfCollection
- DCIM_OwningCollectionElement
- DCIM_ElementConformsToProfile
- DCIM_RoleLimitedToTarget
- DCIM_ElementCapacity
- DCIM_ServiceAffectsElement
- DCIM_AssociatedPowerManagementService
- DCIM_ServiceAvailableToElement
- DCIM_LogManagesRecord
- DCIM_InstalledSoftwareIdentity
- DCIM_ConcreteIdentity
- DCIM_SMARTAttributeInfo
- DCIM_SettingsDefineState
- DCIM_ElementLocation
- DCIM_CredentialContext
- DCIM_OwningJobElement
- BIOS settings supported in Dell Command | Monitor 10.2.1
- Alerts in Dell Command | Monitor 10.2.1
- Sample scripts for Dell Command | Monitor 10.2.1
Table 5. Chassis (continued)
Property Description
PackageType
Enumeration defining the type of the PhysicalPackage.
Possible values are:
● 0 = Unknown — Indicates that the package type is not
known.
● 1 = Other — The package type does not correspond to an
existing enumerated value. The value is specified using the
OtherPackageType property.
● 2 = Rack
● 3 = Chassis/Frame
● 4 = Cross Connect/Backplane
● 5 = Container/Frame Slot
● 6 = Power Supply
● 7 = Fan
● 8 = Sensor
● 9 = Module/Card
● 10 = Port/Connector
● 11 = Battery
● 12 = Processor
● 13 = Memory
● 14 = Power Source/Generator
● 15 = Storage Media Package (example, Disk or Tape Drive)
● 16 = Blade
● 17 = Blade Expansion
NOTE:
This enumeration expands on the list in the Entity
MIB (the attribute, entPhysicalClass). The numeric values
are consistent with CIM's enum numbering guidelines, but
are slightly different than the MIB's values.
The values Rack through Port/Connector are defined per
the Entity-MIB (where the semantics of rack are equivalent to
the MIB's stack value).
The other values (for battery, processor, memory, power
source/generator and storage media package) are self-
explanatory. A value of Blade should be used when the
PhysicalPackage contains the operational hardware aspects of
a ComputerSystem, without the supporting mechanicals such
as power and cooling. For example, a Blade Server includes
processor(s) and memory, and relies on the containing chassis
to supply power and cooling.
In many respects, a Blade can be considered a Module/Card.
However, it is tracked differently by inventory systems and
differs in terms of service philosophy. For example, a Blade is
intended to be hot-plugged into a hosting enclosure without
requiring additional cabling, and does not require a cover to be
removed from the enclosure for installation. Similarly, a Blade
Expansion has characteristics of a Blade and a Module/
Card. However, it is distinct from both due to inventory
tracking and service philosophy, and because of its hardware
dependence on a Blade. A Blade Expansion must be attached
to a Blade prior to inserting the resultant assembly into an
enclosure.
PartNumber
The part number assigned by the organization that is
responsible for producing or manufacturing the
PhysicalElement.
Dell Command | Monitor 10.2.1 classes and properties 25