Reference Guide

Table 139. AssociatedPowerManagementService (continued)
Property Description
● 5 = Power Cycle (Off - Soft)
● 6 = Off - Hard
● 7 = Hibernate (Off - Soft)
● 8 = Off - Soft
● 9 = Power Cycle (Off-Hard)
● 10 = Master Bus Reset
● 11 = Diagnostic Interrupt (NMI)
● 12 = Off - Soft Graceful
● 13 = Off - Hard Graceful
● 14 = Master Bus Reset Graceful
● 15 = Power Cycle (Off - Soft Graceful)
● 16 = Power Cycle (Off - Hard Graceful)
● .. = DMTF Reserved
● 0x7FFF..0xFFFF = Vendor Specific
RequestedPowerState
The desired or the last requested power state of the associated Managed System
Element, irrespective of the mechanism through which the request was made. If the
requested power state is unknown, then the property has the value of 0 Unknown. If
the property has no meaning or is not supported, then the property has the value 12
Not Applicable.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = On
● 3 = Sleep - Light
● 4 = Sleep -_Deep
● 5 = Power Cycle (Off - Soft)
● 6 = Off - Hard
● 7 = Hibernate (Off - Soft)
● 8 = Off - Soft
● 9 = Power Cycle (Off-Hard)
● 10 = Master Bus Reset
● 11 = Diagnostic Interrupt (NMI)
● 12 = Not Applicable
● 13 = Off - Soft Graceful
● 14 = Off - Hard Graceful
● 15 = Master Bus Reset Graceful
● 16 = Power Cycle (Off - Soft Graceful)
● 17 = Power Cycle (Off - Hard Graceful)
● .. = DMTF Reserved
● 0x7FFF..0xFFFF = Vendor Specific
ServiceProvided
The Service that is available.
UserOfService
The ManagedElement that can use the Service.
DCIM_ServiceAvailableToElement
Table 140. ServiceAvailableToElement
Property Description
ServiceProvided
The Service that is available.
248 Dell Command | Monitor 10.2.1 classes and properties