Reference Guide

DCIM_OrderedMemberOfCollection
Table 132. OrderedMemberOfCollection
Property Description
AssignedSequence
AssignedSequence is an unsigned integer n that indicates the relative position of
members within a Collection. When n is a positive integer, it indicates a place in the
sequence of members, with smaller integers indicating earlier positions in the
sequence. The special value 0 indicates don't care. If two or more members have
the same non-zero sequence number, then the ordering between those members is
irrelevant, but they must all be ordered at the appropriate place in the overall
sequence. A series of examples will make ordering of members clearer: If all members
have the same sequence number, regardless of whether it is 0 or non-zero, any
order is acceptable. The values are: 1:MEMBER A 2:MEMBER B 1:MEMBER C
3:MEMBER D indicate two acceptable orders: A,C,B,D or C,A,B,D, because A and C
can be ordered in either sequence, but only at the 1 position.
NOTE: The non-zero sequence numbers do not need to start with 1, and they do
not need to be consecutive. However, the sequence numbers must reflect their
relative magnitude.
Collection
The Collection that aggregates members.
Member
The aggregated member of the Collection.
DCIM_MemberOfCollection
Table 133. MemberOfCollection
Property Description
Collection
The Collection that aggregates members.
Member
The aggregated member of the Collection.
DCIM_OwningCollectionElement
Table 134. OwningCollectionElement
Property Description
OwnedElement
The Collection owned or controlled by the ManagedElement.
OwningElement
The ManagedElement acting as the 'owner' or object that is responsible for the
control of the Collection.
DCIM_ElementConformsToProfile
Table 135. ElementConformsToProfile
Property Description
ConformantStandard
The RegisteredProfile to which the ManagedElement conforms.
ManagedElement
The ManagedElement that conforms to the RegisteredProfile.
Dell Command | Monitor 10.2.1 classes and properties 245