Reference Guide

Table 124. AssociatedCacheMemory (continued)
Property Description
(Determination per I/O) should be specified. Other (1) and Unknown (0) are also
valid values.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Read
● 3 = Read-Ahead
● 4 = Read and Read-Ahead
● 5 = Determination Per I/O
WritePolicy
Defines whether this is write-back (value = 2) or write-through (value = 3) Cache,
or whether this information Varies with Address (4) or is defined individually for
each I/O (5). Also, Other and Unknown (0) can be specified.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Read
● 3 = Read-Ahead
● 4 = Read and Read-Ahead
●
5 = Determination Per I/O
DCIM_AssociatedSensor
Table 125. AssociatedSensor
Property Description
Antecedent
The Sensor.
Dependent
The ManagedSystemElement for which information is measured by the Sensor.
DCIM_RemoteAccessAvailableToElement
Table 126. RemoteAccessAvailableToElement
Property Description
Antecedent
The remote server or system.
Dependent
The EnabledLogicalElement which has knowledge of the remote server or system.
IsDefault
Indicates that this access information is defined as a default configuration for the
system.
OrderOfAccess
When an element is accessing remote services and systems, it MAY be necessary to
order those accesses. This property defines that ordering — where lower numbers
indicate a higher priority for access. A value of 0 (default) indicates that ordering
does not apply. If multiple RemoteAccessPoint instances have the same value for
OrderOfAccess, then these AccessPoints MAY be used in any sequence defined by
the implementation.
Dell Command | Monitor 10.2.1 classes and properties 241