Reference Guide

Table 105. SettingsDefineCapabilities (continued)
Property Description
only one such setting per particular SettingData instance is specified for any
Capabilities. Unless restricted by a Minimums on the same set of properties, all
values that compare lower than the specified values are also considered to be
supported by the associated capabilities instance.
● 3 = Increments — Indicates that this SettingData instance provides increment
values for evaluated properties. For the associated Capabilities, if an evaluated
property currently has no corresponding minimums or maximums, then the
property has no affect. Otherwise, for each evaluated property: its value x is
between the minimum and maximum, inclusively, and has the property that both
the result of maximum minus x and the result of x minus minimum are each an
integer multiple of the increment. If either minimum or maximum is not specified
and the other is, then the missing value is respectively assumed to be the lowest
or highest supported value for the property's data-type. Additionally, if both a
minimum and a maximum are specified for an evaluated property, then the result
of maximum minus minimum is an integer multiple of the increment.
● 4.. = DMTF Reserved
ValueRole
The ValueRole property indicates further semantics on the interpretation of the non-
null, non-key properties of the Component SettingData.
Possible values are:
● 0 = Default — Indicates that property values of the component SettingData
instance will be used as default values, when a new SettingData instance is
created for elements whose capabilities are defined by the associated Capabilities
instance. Across instances of settingdata, for particular properties having the
same semantic purpose, at most one such settingdata instance is specified as a
default.
● 1 = Optimal — Indicates that the SettingData instance represents optimal setting
values for elements associated with the associated capabilities instance. Multiple
component SettingData instances may be declared as optimal.
● 2 = Mean — Indicates that the non-null, non-key, non-enumerated, non-boolean,
numeric properties of the associated SettingData instance represents an average
point along some dimension. For different combinations of SettingData
properties, multiple component SettingData instances may be declared as Mean.
● 3 = Supported — Indicates that the non-null, non-key properties of the
Component SettingData instance represents a set of supported property values
that are not otherwise qualified.
● 4.. = DMTF Reserved
DCIM_DeviceSAPImplementation
Table 106. DeviceSAPImplementation
Property Description
Antecedent
The LogicalDevice.
Dependent
The ServiceAccessPoint implemented using the LogicalDevice.
DCIM_HostedAccessPoint
Table 107. HostedAccessPoint
Property Description
Antecedent
The hosting System.
236 Dell Command | Monitor 10.2.1 classes and properties