Reference Guide
Table Of Contents
- Dell Command | Monitor Version 10.2.1 Reference Guide
- Introduction for Dell Command | Monitor 10.2.1
- Dell Command | Monitor 10.2.1 Namespaces
- Profiles for Dell Command | Monitor 10.2.1
- Classes for Dell Command | Monitor 10.2.1
- Dell Command | Monitor 10.2.1 classes and properties
- Classes supported for systems running Linux
- Classes supported for systems running Windows
- DCIM_AlertIndication
- DCIM_ApplicationProxySetting
- DCIM_BaseMetricDefinition
- DCIM_Card
- DCIM_Chassis
- DCIM_Chip
- DCIM_DesktopMonitor
- DCIM_DHCPProtocolEndpoint
- DCIM_EthernetPort
- DCIM_FlatPanel
- DCIM_IPProtocolEndpoint
- DCIM_ImprovementProgramConsent
- DCIM_ControllerView
- DCIM_PhysicalDiskView
- DCIM_VirtualDiskView
- DCIM_PhysicalMemory
- DCIM_PhysicalPackage
- DCIM_ParallelPort
- DCIM_RemoteServiceAccessPoint
- DCIM_Slot
- DCIM_SerialPort
- DCIM_USBPort
- DCIM_Memory
- DCIM_PCIDevice
- DCIM_DisplayController
- DCIM_Fan
- DCIM_IndicatorLED
- DCIM_PowerSupply
- DCIM_Battery
- DCIM_Processor
- DCIM_NumericSensor
- DCIM_Sensor
- DCIM_DeviceBay
- DCIM_VideoHead
- DCIM_Button
- DCIM_LCDPanel
- DCIM_NetworkPortConfigurationService
- DCIM_TimeService
- DCIM_AccountManagementService
- DCIM_RoleBasedAuthorizationService
- DCIM_PowerManagementService
- DCIM_BootService
- DCIM_IPConfigurationService
- DCIM_PowerUtilizationManagementService
- DCIM_BIOSService
- DCIM_SoftwareInstallationService
- DCIM_ComputerSystem
- DCIM_RecordLog
- DCIM_OperatingSystem
- DCIM_SoftwareIdentity
- DCIM_BIOSElement
- DCIM_ConcreteJob
- DCIM_BootSourceSetting
- DCIM_BootConfigSetting
- DCIM_IPAssignmentSettingData
- DCIM_PowerAllocationSettingData
- DCIM_AssetAcquisition
- DCIM_AssetExtendedWarrantyInformation
- DCIM_AssetOwnerInformation
- DCIM_AssetSupportInformation
- DCIM_AssetWarrantyInformation
- DCIM_AssetSystemInformation
- DCIM_AMTSettings
- DCIM_ASFSettings
- DCIM_VProSettings
- DCIM_AlertIndicationSettingData
- DCIM_HDDAlertIndicationSettingData
- DCIM_BaseMetricValue
- DCIM_LogEntry
- DCIM_IndicatorLEDCapabilities
- DCIM_ProcessorCapabilities
- DCIM_AccountManagementCapabilities
- DCIM_BootServiceCapabilities
- DCIM_PlatformWatchdogServiceCapabilities
- DCIM_DHCPCapabilities
- DCIM_PowerUtilizationManagementCapabilities
- DCIM_EnabledLogicalElementCapabilities
- DCIM_ButtonCapabilities
- DCIM_LCDPanelCapabilities
- DCIM_PowerManagementCapabilities
- DCIM_PhysicalAssetCapabilities
- DCIM_RoleBasedManagementCapabilities
- DCIM_AllocationCapabilities
- DCIM_BIOSServiceCapabilities
- DCIM_SoftwareInstallationServiceCapabilities
- DCIM_ConcreteCollection
- DCIM_RedundancySet
- DCIM_Role
- DCIM_IndicationSettingCollection
- DCIM_ConfigurationCapacity
- DCIM_Location
- DCIM_BIOSEnumeration
- DCIM_BIOSPassword
- DCIM_BIOSString
- DCIM_MemoryError
- DCIM_IdentityContext
- DCIM_OrderedComponent
- DCIM_Container
- DCIM_ConcreteComponent
- DCIM_SystemDevice
- DCIM_AccountOnSystem
- DCIM_InstalledOS
- DCIM_SystemBIOS
- DCIM_SystemComponent
- DCIM_SettingsDefineCapabilities
- DCIM_DeviceSAPImplementation
- DCIM_HostedAccessPoint
- DCIM_HostedCollection
- DCIM_HostedService
- DCIM_VideoHeadOnController
- DCIM_SAPSAPDependency
- DCIM_ReferencedProfile
- DCIM_MetricDefForME
- DCIM_MetricForME
- DCIM_MetricInstance
- DCIM_ElementInConnector
- DCIM_Docked
- DCIM_ConcreteDependency
- DCIM_Realizes
- DCIM_ComputerSystemPackage
- DCIM_RunningOS
- DCIM_UseOfLog
- DCIM_AssociatedIndicatorLED
- DCIM_AssociatedCacheMemory
- DCIM_AssociatedSensor
- DCIM_RemoteAccessAvailableToElement
- DCIM_ServiceServiceDependency
- DCIM_DeviceConnection
- DCIM_ElementSoftwareIdentity
- DCIM_ElementCapabilities
- DCIM_ElementSettingData
- DCIM_OrderedMemberOfCollection
- DCIM_MemberOfCollection
- DCIM_OwningCollectionElement
- DCIM_ElementConformsToProfile
- DCIM_RoleLimitedToTarget
- DCIM_ElementCapacity
- DCIM_ServiceAffectsElement
- DCIM_AssociatedPowerManagementService
- DCIM_ServiceAvailableToElement
- DCIM_LogManagesRecord
- DCIM_InstalledSoftwareIdentity
- DCIM_ConcreteIdentity
- DCIM_SMARTAttributeInfo
- DCIM_SettingsDefineState
- DCIM_ElementLocation
- DCIM_CredentialContext
- DCIM_OwningJobElement
- BIOS settings supported in Dell Command | Monitor 10.2.1
- Alerts in Dell Command | Monitor 10.2.1
- Sample scripts for Dell Command | Monitor 10.2.1
Table 80. PowerManagementCapabilities (continued)
Property Description
● 5 = Timed Power On Supported — Indicates that the
RequestPowerStateChange method can be invoked with the PowerState input
variable set to 'Power On' and the Time parameter set to a specific date and
time, or interval, for power on.
● 6 = Off Hard Power Cycling Supported
● 7 = HW Reset Supported
● 8 = Graceful Shutdown Supported — Indicates that the managed element can be
sent a hardware signal requesting an orderly shutdown prior to the requested
power state change.
PowerStatesSupported
An enumeration that indicates the power states supported by a managed element.
Because this is an array, multiple values can be specified. The current values in the
enumeration are:
● 2 = On — Corresponds to ACPI state G0 or S0 or D0.
● 3 = Sleep - Light — C orresponds to ACPI state G1, S1/S2, or D1.
● 4 = Sleep - Deep — Ccorresponds to ACPI state G1, S3, or D2.
● 5 = Power Cycle (Off - Soft) — Corresponds to ACPI state G2, S5, or D3, but
where the managed element is set to return to power state On at a pre-
determined time.
● 6 = Off — Hard, corresponding to ACPI state G3, S5, or D3.
● 7 = Hibernate (Off - Soft) — Corresponds to ACPI state S4, where the state of
the managed element is preserved and will be recovered upon powering on.
● 8 = Off — Soft, corresponding to ACPI state G2, S5, or D3.
● 9 = Power Cycle (Off-Hard) — Corresponds to the managed element reaching
the ACPI state G3 followed by ACPI state S0.
● 10 = Master Bus Reset, corresponds to the system reaching ACPI state S5
followed by ACPI state S0. This is used to represent system master bus reset.
● 11 = Diagnostic Interrupt (NMI) — Corresponds to the system reaching ACPI
state S5 followed by ACPI state S0. This is used to represent system non-
maskable interrupt.
● 12 = Off - Soft Graceful — Equivalent to Off Soft but preceded by a request to
the managed element to perform an orderlyshutdown.
● 13 = Off - Hard Graceful — Equivalent to Off Hard but preceded by a request to
the managed element to perform an orderly shutdown.
● 14 = Master Bus Rest Graceful — Equivalent to Master Bus Reset but preceded
by a request to the managed element to perform an orderly shutdown.
● 15 = Power Cycle (Off - Soft Graceful) — Equivalent to Power Cycle (Off -
Soft) but preceded by a request to the managed element to perform an orderly
shutdown.
● 16 = Power Cycle (Off - Hard Graceful) — Equivalent to Power Cycle (Off -
Hard) but preceded by a request to the managed element to perform an orderly
shutdown.
● .. = DMTF Reserved.
● 0x7FFF..0xFFFF = Vendor Specific.
DCIM_PhysicalAssetCapabilities
Table 81. PhysicalAssetCapabilities
Property Description
ElementName
The user friendly name for this instance of Capabilities. In addition, the user friendly
name can be used as a index property for a search of query.
NOTE: Name does not have to be unique within a namespace.
218 Dell Command | Monitor 10.2.1 classes and properties