Reference Guide

Table 65. VProSettings (continued)
Property Description
● 3 = Disabled
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
VTxEnabledState
Defines CPU VT-x state for vPro brand.
Possible values are:
● 2 = Enabled
● 3 = Disabled
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
DCIM_AlertIndicationSettingData
Table 66. AlertIndicationSettingData
Property Description
AlertCategory
The identifying information of the entity (instance) for which this Indication is
generated. The property contains the path of an instance, encoded as a string
parameter — if the instance is modeled in the CIM Schema. If not a CIM instance,
the property contains some identifying string that names the entity for which the
Alert is generated. The path or identifying string is formatted per the
AlertingElementFormat property.
AlertType
Primary classification of the Indication.
Possible values are:
● 1 = Other — The Indication's OtherAlertType property conveys its classification.
Use of Other in an enumeration is a standard CIM convention. It means that the
current Indication does not fit into the categories described by this enumeration.
● 2 = Communications Alert — An Indication of this type is principally associated
with the procedures and/or processes required to convey information from one
point to another.
● 3 = Quality of Service Alert — An Indication of this type is principally associated
with a degradation or errors in the performance or function of an entity.
● 4 = Processing Error — An Indication of this type is principally associated with a
software or processing fault.
● 5 = Device Alert — An Indication of this type is principally associated with an
equipment or hardware fault.
● 6 = Environmental Alert — An Indication of this type is principally associated with
a condition relating to an enclosure in which the hardware resides, or other
environmental considerations.
● 7 = Model Change — The Indication addresses changes in the Information Model.
For example, it may embed a Lifecycle Indication to convey the specific model
change being alerted.
● 8 = Security Alert — An Indication of this type is associated with security
violations, detection of viruses, and similar issues.
ElementName
The user-friendly name for this instance of SettingData. In addition, the user-friendly
name can be used as an index property for a search or query.
NOTE: The name does not have to be unique within a namespace.
EventID
The identification number for events of this type.
202 Dell Command | Monitor 10.2.1 classes and properties