Reference Guide

Table 1. AlertIndication (continued)
Property Description Supported
Operating
System(s)
ProbableCause
An enumerated value that describes the probable
cause of the situation that resulted in the
AlertIndication.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Adapter/Card Error
● 3 = Application Subsystem Failure
● 4 = Bandwidth Reduced
●
5 = Connection Establishment Error
● 6 = Communications Protocol Error
● 7 = Communications Subsystem Failure
● 8 = Configuration/Customization Error
● 9 = Congestion
● 10 = Corrupt Data
● 11 = CPU Cycles Limit Exceeded
● 12 = Dataset/Modem Error
● 13 = Degraded Signal
● 14 = DTE-DCE Interface Error
● 15 = Enclosure Door Open
● 16 = Equipment Malfunction
● 17 = Excessive Vibration
● 18 = File Format Error
● 19 = Fire Detected
● 20 = Flood Detected
● 21 = Framing Error
● 22 = HVAC Problem
● 23 = Humidity Unacceptable
● 24 = I/O Device Error
● 25 = Input Device Error
● 26 = LAN Error
● 27 = Non-Toxic Leak Detected
● 28 = Local Node Transmission Error
● 29 = Loss of Frame
● 30 = Loss of Signal
● 31 = Material Supply Exhausted
● 32 = Multiplexer Problem
● 33 = Out of Memory
● 34 = Output Device Error
● 35 = Performance Degraded
●
36 = Power Problem
● 37 = Pressure Unacceptable
● 38 = Processor Problem (Internal Machine
Error)
● 39 = Pump Failure
● 40 = Queue Size Exceeded
● 41 = Receive Failure
● 42 = Receiver Failure
● 43 = Remote Node Transmission Error
● 44 = Resource at or Nearing Capacity
● 45 = Response Time Excessive
Microsoft Windows,
Linux
16 Dell Command | Monitor 10.2.1 classes and properties