Reference Guide

Table 35. Button (continued)
Property Description
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance.
When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
DeviceID
An address or other identifying information used to uniquely name the LogicalDevice.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element.
Possible values are:
● 2 = Enabled
● 3 = Disabled
● 5 = Not Applicable
● 6 = Enabled but Offline
● 7 = No Default
● 9 = Quiesce
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled and disabled states of an element.
It can also indicate the transitions between these requested states.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Enabled — Indicates that the element is or could be executing commands,
will process any queued commands, and queues new requests.
● 3 = Disabled — Indicates that the element will not execute commands and will
drop any new requests.
● 4 = Shutting Down — Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable — Indicates the element does not support being enabled or
disabled.
● 6 = Enabled but Offline — Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test — Indicates that the element is in a test state.
● 8 = Deferred — Indicates that the element may be completing commands, but
will queue any new requests.
● 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
● 10 = Starting — Indicates that the element is in the process of going to an
Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
For example, shutting down (value = 4) and starting (value = 10) are transient states
between enabled and disabled.
RequestedState
An integer enumeration that indicates the last requested or desired state for the
element, irrespective of the mechanism through which it was requested. The actual
state of the element is represented by EnabledState. This property is provided to
compare the last requested and current enabled or disabled states.
Possible values are:
● 0 = Unknown — Indicates the last requested state for the element is unknown.
● 2 = Enabled
● 3 = Disabled
142 Dell Command | Monitor 10.2.1 classes and properties