Reference Guide

Table 30. Processor (continued)
Property Description
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change — Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
● 8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable — Indicates the implementation does not support
representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
UniqueID
A global unique identifier for the processor. This identifier can be unique only within a
processor family.
UpgradeMethod
CPU socket information that includes data on how the processor can be upgraded (if
upgrades are supported). This property is an integer enumeration.
Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Daughter Board
● 4 = ZIF Socket
● 5 = Replacement/Piggy Back
● 6 = None
● 7 = LIF Socket
● 8 = Slot 1
● 9 = Slot 2
● 10 = 370 Pin Socket
● 11 = Slot A
● 12 = Slot M
● 13 = Socket 423
● 14 = Socket A (Socket 462)
● 15 = Socket 478
● 16 = Socket 754
● 17 = Socket 940
● 18 = Socket 939
● 19 = Socket mPGA604
● 20 = Socket LGA771
● 21 = Socket LGA775
● 22 = Socket S1
● 23 = Socket AM2
● 24 = Socket F (1207)
● 25 = Socket LGA1366
● 26 = Socket G34
● 27 = Socket AM3
● 28 = Socket C32
● 29 = Socket LGA1156
● 30 = Socket LGA1567
● 31 = Socket PGA988A
Dell Command | Monitor 10.2.1 classes and properties
121