Reference Guide

Table 28. PowerSupply (continued)
Property Description
TotalOutputPower
Represents the total output power of the PowerSupply in milli Watts. 0 denotes
unknown.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
● 0 = Unknown
● 2 = Enabled
● 3 = Disabled
● 4 = Shut Down
● 5 = No Change — Indicates that no transition is in progress.
● 6 = Offline
● 7 = Test
●
8 = Defer
● 9 = Quiesce
● 10 = Reboot
● 11 = Reset
● 12 = Not Applicable — Indicates that the implementation does not support
representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
TypeOfRangeSwitching
Describes the kind of input voltage range switching that is implemented in this
PowerSupply.
Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Manual
● 4 = Autoswitch
● 5 = Wide Range
● 6 = Not Applicable
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
DCIM_Battery
Table 29. Battery
Property Description
BatteryStatus
Description of the charge status of the Battery.
Possible values are:
● 1 = Other
● 2 = Unknown
● 3 = Fully Charged
● 4 = Low
● 5 = Critical
● 6 = Charging
● 7 = Charging and High
●
8 = Charging and Low
● 9 = Charging and Critical
● 10 = Undefined
Dell Command | Monitor 10.2.1 classes and properties 107