Reference Guide

Table 27. IndicatorLED (continued)
Property Description
Where <OrgID> and <LocalID> are separated by two colons (::), and where <OrgID>
includes a copyrighted, trademarked, or otherwise unique name that is owned by the
business entity that is creating or defining the ControlPattern or that is a registered
ID assigned to the business entity by a recognized global authority. <LocalID> is
chosen by the business entity and should not be reused to identify different
underlying (real-world) elements.
EnabledDefault
An enumerated value indicating an administrator's default or startup configuration
for the Enabled State of an element.
Possible values are:
● 2 = Enabled
● 3 = Disabled
● 5 = Not Applicable
● 6 = Enabled but Offline
● 7 = No Default
● 9 = Quiesce
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
It is an integer enumeration that indicates the enabled and disabled states of an
element. It can also indicate the transitions between these requested states. For
example, shutting down (value = 4) and starting (value = 10) are transient states
between enabled and disabled.
Possible values are:
● 0 = Unknown
● 1 = Other
● 2 = Enabled — Indicates that the element is or could be executing commands,
will process any queued commands, and queues new requests.
● 3 = Disabled — Indicates that the element will not execute commands and will
drop any new requests.
● 4 = Shutting Down — Indicates that the element is in the process of going to a
Disabled state.
● 5 = Not Applicable — Indicates the element does not support being enabled or
disabled.
● 6 = Enabled but Offline — Indicates that the element may be completing
commands, and will drop any new requests.
● 7 = In Test — Indicates that the element is in a test state.
● 8 = Deferred — Indicates that the element may be completing commands, but
will queue any new requests.
● 9 = Quiesce — Indicates that the element is enabled but in a restricted mode.
● 10 = Starting — Indicates that the element is in the process of going to an
Enabled state. New requests are queued.
● 11..32767 = DMTF Reserved
● 32768..65535 = Vendor Reserved
HealthState
Indicates the current health of the element. This attribute expresses the health of
this element but not necessarily that of its subcomponents.
Possible values are:
● 0 = Unknown — The implementation cannot report on HealthState at this time.
● 5 = OK — The element is fully functional and is operating within normal
operational parameters and without error.
● 10 = Degraded/Warning — The element is in working order and all functionality is
provided. However, the element is not working to the best of its abilities. For
Dell Command | Monitor 10.2.1 classes and properties 103