Reference Guide

Table 27. IndicatorLED (continued)
Property Description
● 9 = Black
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
ControlMode
ControlMode indicates the current control mode for the LED.
Possible values are:
● 2 = Automatic — Indicates the state of the LED is being controlled by the
management infrastructure.
● 3 = Manual — Indicates the state of the LED is being controlled by a
management client.
● 4 = Test — Indicates the LED is in a test mode.
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
ControlPattern
An LED may exhibit a range of behavior from very simple (ex. solid on) to very
complicated (ex. a series of blinks of alternating color and duration). ControlPattern
specifies the vendor or standard behavior exhibited by the LED if it cannot be
described using one of the standard behaviors listed for the ActivationState
property.
If ActivationState has the value 5 (ControlPattern), the ControlPattern property is
not NULL.
The value of ControlPattern is constructed using the following preferred algorithm:
<OrgID>::<Pattern>
Where <OrgID> and < Pattern> are separated by two colons (::), and where <OrgID>
includes a copyrighted, trademarked, or otherwise unique name that is owned by the
business entity that is creating or defining the ControlPattern or that is a registered
ID assigned to the business entity by a recognized global authority. If the definition
of the value is specified by the DMTF, the value of <OrgID> is DMTF. <Pattern> is
chosen by the business entity and is not reused to identify different underlying (real-
world) behaviors. If the behavior specified for the LED adheres to a standard or
proprietary specification, <Pattern> is a uniquely assigned value identifying the
behavior. If the behavior for the LED is described using a standard or proprietary
grammar, <Pattern> is prefixed with a uniquely assigned identifier for the grammar.
CreationClassName
Indicates the name of the class or the subclass used in the creation of an instance.
When used with the other key properties of this class, this property allows all
instances of this class and its subclasses to be uniquely identified.
DefaultActivationState
Indicates the default state of an LED. See ActivationState for a description of the
values.
Possible values are:
● 2 = Lit
● 3 = Blinking
● 4 = Off
● 5 = Control Pattern
● .. = DMTF Reserved
● 32768..65535 = Vendor Reserved
DeviceID
An address or other identifying information used to uniquely name the LogicalDevice.
ElementName
Specifies an identifier for the LED. The value of ElementName is constructed using
the following preferred algorithm:
<OrgID>::<LocalID>
102 Dell Command | Monitor 10.2.1 classes and properties