Reference Guide

Table Of Contents
Table 26. Fan (continued)
Property Description
6 = Offline
7 = Test
8 = Deferred
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not Applicable
.. = DMTF Reserved
32768..65535 = Vendor Reserved
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
0 = Unknown
2 = Enabled
3 = Disabled
4 = Shut Down
5 = No Change Indicates that no transition is in progress.
6 = Offline
7 = Test
8 = Defer
9 = Quiesce
10 = Reboot
11 = Reset
12 = Not Applicable Indicates the implementation does not support
representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is in the process
of transitioning.
VariableSpeed
Indication of whether the fan supports variable speeds.
DCIM_IndicatorLED
Table 27. IndicatorLED
Property Description
Color
Color This property indicates the current color of the LED. If the value of the
ActivationState property is 4 (Off) this property indicates the color of the LED the
last time it was lit, or has the value 2 (Not Applicable).
Possible values are:
0 = Unknown
1 = Other
2 = Not Applicable
3 = White
4 = Red
5 = Green
6 = Blue
7 = Orange
8 = Yellow
Dell Command | Monitor 10.2.1 classes and properties 101