Dell Command | Monitor 9.
Version 9.1 Release Date: July 2015 Previous Version Dell Command | Monitor 9.0 The Dell Command | Monitor (formally known as OpenManage™ Client Instrumentation or OMCI) enables remote management application programs to access the client's system information, monitor the status, change the state, and shut it down remotely.
• Windows 10 Pro (32 and 64 bit) • Windows 10 Core (32 and 64 bit) • Windows 8.1 Enterprise (32 and 64 bit) • Windows 8.1 Pro (32 and 64 bit) • Windows 8.
• - Stealth Mode Quiet Bluetooth - Stealth Mode Quiet Fans - Stealth Mode Quiet GPS - Stealth Mode Quiet LCD - Stealth Mode Quiet LEDs - Stealth Mode Quiet Speakers - Stealth Mode Quiet WLAN - Stealth Mode Quiet WWAN - Stealth Mode WiGig Radio - USB Port 20 - USB Port 21 - USB Port 22 - USB Port 23 - Wireless Switch WLAN-WIGIG Control - Wireless Switch GPS On WWAN Radio Updated SCCM MOF as per the supported Attributes Fixes Support for Trusted Execution token.
CurrentResolutionV, ColorModePresetCapabilities, FrequencyH and FrequencyV, Brightness, Contrast, MaxBrightness, and MaxContrast. Resolution: • InputSource and InputSourceCapabilities - Users can get equivalent results from InputAnalog/InputDigital/InputDisplayPort/InputDVI/InputHDMI properties under the DCIM_DesktopMonitor class. • CurrentResolutionH and CurrentResolutionV - Users can get this information from CurrentVerticalResolution or CurrentHorizontalResolution properties from DCIM_VideoHead class.
Command | Monitor can be installed on other OS language versions such as French, German, Spanish, Japanese, Korean, Simplified Chinese, and Traditional Chinese of supported Windows operating systems. Issue: Dell Command | Monitor allows enabling Secure Boot when Legacy Option ROM is enabled and boot mode is UEFI; however, there is no negative impact due to this on the BIOS. This issue will be addressed in the upcoming BIOS versions.
(http://en.community.dell.com/techcenter/extras/m/mediagallery/20383332.aspx) to set Peak Shift Configuration. While viewing Intel RAID alerts using DCIM_LogEntry class, severity is reported as Unknown instead of a Warning message when virtual disk health state is changed to Rebuilding. Issue: If the fan is not working as indicated by Health Status and OperationalStatus attributes, then the attribute Current Status will be blank.
Issue: Previous state attribute in SNMP displays OK for all repetitive alerts. Issue: If the values of Upper NonCritical Threshold for NumericSensor class are close to reading or status values, then an event might be generated although the same might not be shown in the class attributes. Issue: Enumeration of some classes might not display appropriate values immediately after upgrade.
Issue: For LSI controllers, status or event may not be generated when the Battery Backup Unit (BBU) is degraded. Resolution: The BBU degraded status can be viewed in the application log for event (Id #161 of category type: Warning) generated by source MR_MONITOR. Issue: After upgrading from Windows OS, enumerating WMI classes or walk of the SNMP OID may not display appropriate results. Resolution: Reinstall Dell Command | Monitor to the newer build or repair the build from control panel.
• To complete the upgrade, reboot the system./Reboot the system to complete the upgrage. • Following an uninstallation, it may be necessary to reboot the system for the uninstallation to complete. • On some Dell systems, the Processor Logical Processor (HyperThreading) setting in the DCIM_BIOSEnumeration class displays ‘Enabled’ or ‘Disabled’ even if the installed processor does not support hyperthreading technology.
Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. 2. 3. 4. Go to support.dell.com. Select your support category.
