Reference Guide

Property Description
• 6 = Offline — Indicates that the element has
been requested to transition to the Enabled but
Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down
and then moving to an Enabled state.
• 11 = Reset — Indicates that the element is first
Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
Speed
USB Port Speed in bits per second. This speed is
determined and set by the attached Device. The
attached Device is indicated using the
USBConnection association. At this time, only
several Port speeds are valid. These are: 1.5Mbps
and 12Mbps. The value 0 can also be specified to
indicate that the current speed is unknown or 1 to
indicate that the speed is other than 1.5 or 12Mbps.
Possible values are: 0, 1, 1500000, 12000000
SystemCreationClassName
The CreationClassName of the scoping system.
SystemName
The System Name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is
transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is
in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates the
implementation does not support representing
ongoing transitions.
98