Reference Guide

Property Description

For example, shutting down (value = 4) and

starting (value = 10) are transient states between

enabled and disabled.

IPv4Address

The IPv4 address that this ProtocolEndpoint

represents.

IPv6Address

The IPv6 address that this ProtocolEndpoint

represents.

IPv6AddressType

Identifies the type of address found in the

IPv6Address property. The values of this property

are interpreted according to RFC4291, Section 2.4

Possible values are:

• 2 = Unspecified

• 3 = Loopback

• 4 = Multicast

• 5 = Link Local Unicast

• 6 = Global Unicast

• 7 = Embedded IPv4 Address

• 8 = Site Local Unicast

• .. = DMTF Reserved

• 32768..65535 = Vendor Reserved

IPv6SubnetPrefixLength

Identifies the prefix length of the IPv6Address

property that is used to specify a subnet

IPVersionSupport

This property explicitly defines support for different

versions of the IP protocol, for this Endpoint. It is

deprecated since the ProtocolIFType also provides

this functionality by describing an endpoint as IPv4

only (value = 4096), IPv6 only (value = 4097), or

IPv4/v6 (value = 4098).

Possible values are:

• 0 = Unknown

• 1 = IPv4 Only

• 2 = IPv6 Only

• 3 = Both IPv4 and IPv6

Name

A string that identifies this ProtocolEndpoint with

either a port or an interface on a device. To ensure

uniqueness, the Name property should be

prepended or appended with information from the

Type or OtherTypeDescription properties. The

method selected is described in the NameFormat

property of this class.