Reference Guide

Dell Command | Monitor Event
(Windows Event Log Number)
Description
PhysicalDiskFailed (1813)
A physical hard-disk drive has failed.
PhysicalDiskOffline (1814)
A physical hard-disk drive is offline.
VitualDiskDegraded (1821)
A virtual hard-disk drive is degraded.
VirtualDiskRebuilding (1822)
A virtual hard-disk drive is rebuilding.
VirtualDiskFailed (1823)
A virtual hard-disk drive has failed.
VirtualDiskOffline (1824)
A virtual hard-disk drive is offline.
NumberOfDisksIncreased
(2030)
A hard-disk drive has been added.
NumberOfDisksDecreased
(2031)
A hard-disk drive has been removed.
MemorySizeIncreased (2032)
The memory size has been increased.
MemorySizeDecreased (2033)
The memory size has been decreased.
DiskCapacity (2034)
In the current version, two user-defined thresholds are used. An
event is generated only when the conditions of both thresholds are
met. The first threshold, expressed as an absolute value in megabytes,
specifies the size of the hard-disk drive to be monitored. Hard-disk
drives with a capacity smaller than the specified size are ignored. The
second threshold is expressed as a percentage of the hard-disk drive
size. An event is generated when the available free space on one of
the monitored hard-disk drives falls below this percentage
NumberOfProcessorsIncreased
(2035)
Number of processors on the system has increased
NumberOfProcessorsDecrease
d (2036)
A processor has been removed.
HDD Smart Failure(2037)
A hard-disk drive condition has occurred that may eventually lead to
a hard-disk drive failure.
DiskSizeIncreased (2038)
The size of at least one hard-disk drive has increased.
DiskSizeDecreased (2039)
The size of at least one hard-disk drive has decreased.
350