Reference Guide

Property Description
CurrentHorizontalResolution
Current number of horizontal pixels.
CurrentNumberOfColumns
If in character mode, number of columns for this DisplayController.
Otherwise, enter 0.
CurrentNumberOfRows
If in character mode, number of rows for this Video Controller.
Otherwise, enter 0.
CurrentScanMode
Current scan mode.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Not Supported
• 3 = Non-Interlaced Operation
• 4 = Interlaced Operation
CurrentVerticalResolution
Current number of vertical pixels.
Description
Provides a textual description of the object.
DeviceID
An address or other identifying information used to uniquely name
the LogicalDevice.
ElementName
A user-friendly name for the object. This property allows each
instance to define a user-friendly name in addition to its key
properties, identity data, and description information.
NOTE: The Name property of ManagedSystemElement is also
defined as a user-friendly name. But, it is often subclassed to be
a Key. It is not reasonable that the same property can convey
both identity and a user-friendly name, without inconsistencies.
Where Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the
Name and ElementName properties.
EnabledDefault
An enumerated value indicating an administrator's default or startup
configuration for the Enabled State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
164