Dell Command | Monitor Version 9.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2008 - 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Contents 1 Introduction........................................................................................................... 8 Introduction to the SNMP Reference Guide........................................................................................ 8 Dell Command | Monitor management instrumentation base..................................................... 9 SNMP basic terminology.................................................................................................................
System state cooling device status combined.............................................................................20 System state cooling device status details...................................................................................20 System state temperature state details........................................................................................ 20 System state temperature status combined.................................................................................
System BIOS characteristics ext1..................................................................................................33 System BIOS characteristics ext2................................................................................................. 34 6 Operating system group................................................................................... 35 Operating system table................................................................................................................
9 Device group....................................................................................................... 63 Device tables....................................................................................................................................... 63 Processor device table.................................................................................................................. 63 Memory device table................................................................................
Alert number of HDD increased................................................................................................... 92 Alert number of processor decreased..........................................................................................92 Alert number of processor increased...........................................................................................93 Alert physical disk degraded...............................................................................................
Introduction 1 This reference guide provides information about the Simple Network Management Protocol (SNMP) Management Information Base (MIB) which is applicable to Dell Command | Monitor. Introduction to the SNMP Reference Guide This reference guide provides a formatted version of the following MIB that are released with the current version of Dell Command | Monitor. Sections in this guide follow MIB groups and provide explanations and definitions for the terms used to define MIB objects.
Section Topics 11 Trap Variables — Describes in-band traps defined in the Dell Command | Monitor MIB. Dell Command | Monitor management instrumentation base The Dell Command | Monitor MIB (10909.mib) provides instrumentation data that allows you to monitor the health of a client system with SNMP management applications. It provides: • Information about the status at key points in the system.
• The Dell Command | Monitor Installation Guide provides information on installing Dell Command | Monitor. • The Dell Command | Monitor User Guide provides information on using Dell Command | Monitor. Accessing documents from Dell support site You can access the required documents in one of the following ways: • Using the following links: – For all Enterprise Systems Management documents — dell.com/softwaresecuritymanuals – For OpenManage documents — dell.
Dell Command | Monitor MIB version group 2 The Dell Command | Monitor Management Information Base (MIB) Version Group defines the attributes that identify the version of the Dell Command | Monitor MIB supported by the systems management software. The mIBMajorVersionNumber, mIBMinorVersionNumber, and mIBMaintenanceVersionNumber attributes are scalar objects, that are not related to other MIB objects and are not placed in a table. Name mIBVersionGroup Object ID .1.3.6.1.4.1.674.10909.1.
Management information base maintenance version number Name mIBMaintenanceVersionNumber Object ID .1.3.6.1.4.1.674.10909.1.1.3 Description This attribute defines the maintenance version number for the version of the MIB supported by the systems management software. For example, if the MIB version is 1.2.3, the maintenance version number is 3.
Systems management software group 3 The Systems Management Software Group allows users to see information about the standards and software that are supported by the agent of a particular managed computer. The Systems Management Software Group classifies each computer according to the systems management standard that the agent supports. Name systemManagementSoftwareGroup Object ID .1.3.6.1.4.1.674.10909.1.100 Systems management software The following objects describe the fields for client systems.
Systems management software build number Name systemManagementSoftwareBuildNumber Object ID .1.3.6.1.4.1.674.10909.1.100.3 Description This attribute defines the build number of the instrumentation component of the systems management software. Syntax DellUnsigned16BitRange Access Read only Systems management software description name Name systemManagementSoftwareDescriptionName Object ID .1.3.6.1.4.1.674.10909.1.100.
Syntax INTEGER {supportsSNMP(1), supportsDMI(2), supportsSNMPandDMI(3), supportsCIMOM(4), supportsSNMPandCIMOM(5), supportsSNMPandDMIandCIMOM(7) } Access Read only Systems management software SNMP agent feature flags Name systemManagementSoftwareSNMPAgentFeatur eFlags Object ID .1.3.6.1.4.1.674.10909.1.100.12 Description This attribute defines the features of the SNMP agent software provided by the operating system. If the value is zero, none of the features are enabled.
System state group 4 The Management Information Base (MIB) variables presented in this section enable you to track various attributes that describe the state of the critical components supported by your system. Components monitored under the System State Group include power supplies, AC power cords, AC power switches, cooling devices, temperature, fan, amperage, and voltage probes. Name systemStateGroup Object ID .1.3.6.1.4.1.674.10909.1.
• SystemStateVoltageStatusDetails • SsystemStateCoolingDeviceStatusDetails • SystemStateTemperatureStatusDetails • SystemStateMemoryDeviceStatusDetails • SystemStateChassisIntrusionStatusDetails System state table Name systemStateTable Object ID .1.3.6.1.4.1.674.10909.1.200.10 Description This object defines the System State Table. Syntax SEQUENCE OF SystemStateTableEntry Access Not accessible System state table entry Name systemStateTableEntry Object ID .1.3.6.1.4.1.674.10909.1.200.
ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only System state chassis state Name systemStateChassisState Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.3 Description This attribute defines the state settings of the chassis. Syntax INTEGER {unknown(1), enabled(2), notReady(4), enabledAndNotReady(6) } Access Read only System state chassis status Name systemStateChassisStatus Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.
Syntax OCTET STRING (SIZE(1..128)) Access Read only System state voltage status combined Name systemStateVoltageStatusCombined Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.12 Description This attribute defines the combined status of all voltage probes of this chassis. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only System state voltage status details Name systemStateVoltageStatusDetails Object ID .1.3.6.1.4.1.674.10909.1.200.10.
System state cooling device status combined Name systemStateCoolingDeviceStatusCombined Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.21 Description This attribute defines the combined status of all cooling devices of this chassis. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only System state cooling device status details Name systemStateCoolingDeviceStatusDetails Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.
System state temperature status combined Name systemStateTemperatureStatusCombined Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.24 Description This attribute defines the combined status of all temperature probes of this chassis. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only System state temperature status details Name systemStateTemperatureStatusDetails Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.
System state memory device status combined Name systemStateMemoryDeviceStatusCombined Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.27 Description This attribute defines the combined status of all memory devices of this chassis. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only System state memory device status details Name systemStateMemoryDeviceStatusDetails Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.
System state chassis intrusion status combined Name systemStateChassisIntrusionStatusCombin ed Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.30 Description This attribute defines the combined status of all intrusion detection devices of this chassis. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only System state chassis intrusion status details Name systemStateChassisIntrusionStatusDetail s Object ID .1.3.6.1.4.1.674.10909.1.200.10.1.
Chassis information group 5 The Chassis Information Group provides information about the type or types of chassis, and the settings for devices on each chassis. Information is also available about the current date and time displayed on the chassis, intrusion warnings, systems management basic input/output system (SMBIOS), and so on. Name chassisInformationGroup Object ID .1.3.6.1.4.1.674.10909.1.
Chassis index chassis information Name chassisIndexChassisInformation Object ID .1.3.6.1.4.1.674.10909.1.300.10.1.1 Description This attribute defines the index (one-based) of the chassis. Syntax DellObjectRange Access Read only Chassis status Name chassisStatus Object ID .1.3.6.1.4.1.674.10909.1.300.10.1.4 Description This attribute defines the status of the chassis.
subChassis(19), busExpansionChassis(20), peripheralChassis(21), raidChassis(22), rackMountChassis(23), sealedCasePC(24), multiSystemChassis(25) } Access Read only Chassis name Name chassisName Object ID .1.3.6.1.4.1.674.10909.1.300.10.1.7 Description This attribute defines the user-assigned name of the chassis. Syntax DellString Access Read only Chassis manufacturer name Name chassisManufacturerName Object ID .1.3.6.1.4.1.674.10909.1.300.10.1.
Syntax DisplayString (SIZE (0..10)) Access Read only Chassis service tag name Name chassisServiceTagName Object ID .1.3.6.1.4.1.674.10909.1.300.10.1.11 Description This attribute defines the service tag name of the chassis. Syntax DisplayString (SIZE (0..7)) Access Read only Chassis ID Name chassisID Object ID .1.3.6.1.4.1.674.10909.1.300.10.1.12 Description This attribute defines the system ID. If the value is 254 (0xFE), the attribute chassisID Extension provides the system ID.
storageClass(8) } Access Read only Chassis system name Name chassisSystemName Object ID .1.3.6.1.4.1.674.10909.1.300.10.1.15 Description This attribute defines the host name of the system. Syntax DellString Access Read only Chassis system boot date name Name chassisSystemBootDateName Object ID .1.3.6.1.4.1.674.10909.1.300.10.1.16 Description This attribute defines boot time of the system. Dates are defined in the ASCII format: yyyyMMddhhmmss.uuuuuu+fff or yyyyMMddhhmmss.
Access Read only System BIOS table Name systemBIOSTable Object ID .1.3.6.1.4.1.674.10909.1.300.50 Description This object defines the System BIOS Table. Syntax SEQUENCE OF SystemBIOSTableEntry Access Not accessible System BIOS table entry Name systemBIOSTableEntry Object ID .1.3.6.1.4.1.674.10909.1.300.50.1 Description This object defines the System BIOS Table Entry. Syntax SystemBIOSTableEntry Access Not accessible System BIOS chassis index Name systemBIOSchassisIndex Object ID .1.
System BIOS state capabilities Name systemBIOSStateCapabilities Object ID .1.3.6.1.4.1.674.10909.1.300.50.1.3 Description This attribute defines the state capabilities of the system BIOS. Syntax INTEGER {unknownCapabilities(1), enableCapable(2), notReadyCapable(4), enableAndNotReadyCapable(6) } Access Read only System BIOS status Name systemBIOSStatus Object ID .1.3.6.1.4.1.674.10909.1.300.50.1.5 Description This attribute defines the status of the system BIOS.
Syntax DellDateName Access Read only System BIOS version name Name systemBIOSVersionName Object ID .1.3.6.1.4.1.674.10909.1.300.50.1.8 Description This attribute defines the version name of the system BIOS. Syntax DellString Access Read only System BIOS starting address Name systemBIOSStartingAddress Object ID .1.3.6.1.4.1.674.10909.1.300.50.1.9 Description This attribute defines the starting address of the system BIOS. Zero indicates the starting address is unknown.
System BIOS characteristics Name systemBIOSCharacteristics Object ID .1.3.6.1.4.1.674.10909.1.300.50.1.12 Description This attribute defines characteristics of the system BIOS. This attribute is a bit field where a bit has the meaning defined below when set to 1 (one). Bit 63 is the first bit in the value, and bit 0 is the last bit in the value. See the description of DellUnsigned64BitRange at the beginning of this file for more information on the format of the value.
• • • • • • • • • • • • • • • Bit 24 — Int 13h - 3.5 in / 720 KB Floppy Services are supported Bit 25 Int 13h - 3.5 in / 2.
System BIOS characteristics ext2 Name systemBIOSCharacteristicsExt2 Object ID .1.3.6.1.4.1.674.10909.1.300.50.1.14 Description This attribute defines additional characteristics of the system BIOS. This attribute is a bit field where a bit has the meaning defined below when set to 1 (one).
Operating system group 6 The Operating System Group provides status and identifying information about a system’s operating system. Identifying information includes the name, version, service pack, and patch level of the installed operating system. Name operatingSystemGroup Object ID .1.3.6.1.4.1.674.10909.1.
Description This attribute defines the index (one-based) of the associated chassis. Syntax DellObjectRange Access Read only Operating system status Name operatingSystemStatus Object ID .1.3.6.1.4.1.674.10909.1.400.10.1.4 Description This attribute defines the status of the operating system. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only Operating system is primary Name operatingSystemIsPrimary Object ID .1.3.6.1.4.1.674.
Operating system operating system version name Name operatingSystemOperatingSystemVersionNa me Object ID .1.3.6.1.4.1.674.10909.1.400.10.1.7 Description This attribute defines the version of the operating system. Syntax DisplayString (SIZE (0..255)) Access Read only Operating system memory table Name operatingSystemMemoryTable Object ID .1.3.6.1.4.1.674.10909.1.400.20 Description This object defines the Operating System Memory Table.
Operating system memory chassis index Name operatingSystemchassisIndex Object ID .1.3.6.1.4.1.674.10909.1.400.20.1.1 Description This attribute defines the index (one-based) of the associated chassis. Syntax DellObjectRange Access Read only Operating system memory state capabilities Name operatingSystemMemoryStateCapabilities Object ID .1.3.6.1.4.1.674.10909.1.400.20.1.2 Description This attribute defines the state capabilities of the operating system memory.
Syntax DellUnsigned32BitRange Access Read only Operating system memory available physical size Name operatingSystemMemoryAvailablePhysicalS ize Object ID .1.3.6.1.4.1.674.10909.1.400.20.1.6 Description This attribute defines the available physical memory for the operating system memory in KB. Syntax DellUnsigned32BitRange Access Read only Operating system memory total page file size Name operatingSystemMemoryTotalPageFileSize Object ID .1.3.6.1.4.1.674.10909.1.400.20.1.
Remote flash BIOS group 7 The Remote Flash Basic Input/Output System (BIOS) Table defines the variables used to remotely update the BIOS in a system. The variables also define the capabilities of BIOS updates on the system. Name remoteFlashBIOSGroup Object ID .1.3.6.1.4.1.674.10909.1.900 Remote flash BIOS group table The Remote Flash BIOS Group defines objects in the Remote Flash BIOS MIB table. Remote flash BIOS table Name remoteFlashBIOSTable Object ID .1.3.6.1.4.1.674.10909.1.900.
Syntax DellObjectRange Access Read only Remote flash BIOS index Name remoteFlashBIOSIndex Object ID .1.3.6.1.4.1.674.10909.1.900.10.1.2 Description This attribute defines the index (one-based) of the remote flash BIOS function. Syntax DellObjectRange Access Read only Remote flash BIOS status Name remoteFlashBIOSStatus Object ID .1.3.6.1.4.1.674.10909.1.900.10.1.5 Description This attribute defines the status of the remote flash BIOS function.
hh are the hours mm are the minutes ss are the seconds uuuuuu is the number of microseconds, and +fff or -fff is the offset from UTC in minutes. Syntax DellDateName Access Read only Remote flash BIOS completion code Name remoteFlashBIOSCompletionCode Object ID .1.3.6.1.4.1.674.10909.1.900.10.1.7 Description This attribute defines the status completion code for the last BIOS flashed.
8 Port group The Port Group provides information about the different types of ports that may be present in your system. This management information base (MIB) group also provides information about the capabilities, states, and settings that are possible for each port. Name portGroup Object ID .1.3.6.1.4.1.674.10909.1.
Pointing port chassis index Name pointingPortChassisIndex Object ID .1.3.6.1.4.1.674.10909.1.1000.10.1.1 Description This attribute defines the index (one-based) of the associated chassis. Syntax DellObjectRange Access Read only Pointing port index Name pointingPortIndex Object ID .1.3.6.1.4.1.674.10909.1.1000.10.1.2 Description This attribute defines the index (one-based) of the pointing port.
connectorPortTypeIsMicroDIN(10), connectorPortTypeIsAccessBusUSB(11), connectorPortTypeIsPC98(12) } Access Read only Pointing port name Name pointingPortName Object ID .1.3.6.1.4.1.674.10909.1.1000.10.1.8 Description This attribute defines name of the pointing port. Syntax DellString Access Read only Pointing port bios connector type Name pointingPortBIOSConnectorType Object ID .1.3.6.1.4.1.674.10909.1.1000.10.1.
, portConnectorTypeIsMiniJack(33), portConnectorTypeIsBNC(34), portConnectorTypeIs1394(35), portConnectorTypeIsPC98(36), portConnectorTypeIsPC98Hireso(37),portC onnectorTypeIsPCH98(38), portConnectorTypeIsPC98Note(39), portConnectorTypeIsPC98Full(40) } Access Read only Keyboard port table Name keyboardPortTable Object ID .1.3.6.1.4.1.674.10909.1.1000.20 Description This object defines the Keyboard Port Table.
Access Read only Keyboard status Name keyboardPortStatus Object ID .1.3.6.1.4.1.674.10909.1.1000.20.1.5 Description This attribute defines the status of the keyboard port. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only Keyboard port connector type Name keyboardPortConnectorType Object ID .1.3.6.1.4.1.674.10909.1.1000.20.1.7 Description This attribute defines the connector type of the keyboard port.
Keyboard port BIOS connector type Name keyboardPortBIOSConnectorType Object ID .1.3.6.1.4.1.674.10909.1.1000.20.1.9 Description This attribute defines the BIOS connector type of the keyboard port.
Description This object defines the Processor Port Table. Syntax SEQUENCE OF ProcessorPortTableEntry Access Not accessible Processor port table entry Name processorPortTableEntry Object ID .1.3.6.1.4.1.674.10909.1.1000.30.1 Description This object defines the Processor Port Table Entry. Syntax ProcessorPortTableEntry Access Not accessible Processor port chassis index Name processorPortchassisIndex Object ID .1.3.6.1.4.1.674.10909.1.1000.30.1.
Access Read only Processor port connector type Name processorPortConnectorType Object ID .1.3.6.1.4.1.674.10909.1.1000.30.1.7 Description This attribute defines the connector type of the processor port.
portConnectorTypeIsMiniDIN(15), portConnectorTypeIsMicroDIN(16), portConnectorTypeIsPS2(17), portConnectorTypeIsInfrared(18), portConnectorTypeIsHPHIL(19), portConnectorTypeIsAccessBussUSB(20), portConnectorTypeISSASCSI(21), portConnectorTypeIsCirdin8Male(22), portConnectorTypeIsCirdin8Female(23), portConnectorTypeIsIDE(24), portConnectorTypeIsFloppy(25), portConnectorTypeIsDIN9Pin(26), portConnectorTypeIsDIN25Pin(27), portConnectorTypeIsDIN50Pin(28), portConnectorTypeIsDIN68Pin(29), portConnectorTypeIsCDRO
Memory device port chassis index Name memoryDevicePortchassisIndex Object ID .1.3.6.1.4.1.674.10909.1.1000.40.1.1 Description This attribute defines the index (one-based) of the associated chassis. Syntax DellObjectRange Access Read only Memory device port index Name memoryDevicePortIndex Object ID .1.3.6.1.4.1.674.10909.1.1000.40.1.2 Description This attribute defines the index (one-based) of the memory device port.
connectorPortTypeIsDIP(6), connectorPortTypeIsZIP(7), connectorPortTypeIsAProprietaryCard(8), connectorPortTypeIsDIMM(9), connectorPortTypeIsTSOP(10), connectorPortTypeIsARowOfChips(11), connectorPortTypeIsRIMM(12), connectorPortTypeIsSODIMM(13), connectorPortTypeIsSRIMM(14) } Access Read only Memory device port name Name memoryDevicePortName Object ID .1.3.6.1.4.1.674.10909.1.1000.40.1.8 Description This attribute defines name of the memory device port.
portConnectorTypeIsDIN9Pin(26), portConnectorTypeIsDIN25Pin(27), portConnectorTypeIsDIN50Pin(28), portConnectorTypeIsDIN68Pin(29), portConnectorTypeIsCDROMLineOut(30), portConnectorTypeIsMiniCentronics14(31) , portConnectorTypeIsMiniCentronics26(32) , portConnectorTypeIsMiniJack(33), portConnectorTypeIsBNC(34), portConnectorTypeIs1394(35), portConnectorTypeIsPC98(36), portConnectorTypeIsPC98Hireso(37), portConnectorTypeIsPCH98(38), portConnectorTypeIsPC98Note(39), portConnectorTypeIsPC98Full(40) } Access R
Parallel port index Name processorPortIndex Object ID .1.3.6.1.4.1.674.10909.1.1000.70.1.2 Description This attribute defines the index (one-based) of the processor port. Syntax DellObjectRange Access Read only Parallel port status Name parallelPortStatus Object ID .1.3.6.1.4.1.674.10909.1.1000.70.1.5 Description This attribute defines the status of the parallel port.
Parallel port name Name parallelPortName Object ID .1.3.6.1.4.1.674.10909.1.1000.70.1.8 Description This attribute defines the parallel port name. Syntax DellString Access Read only Parallel port connector pin out Name parallelPortConnectorPinOut Object ID .1.3.6.1.4.1.674.10909.1.1000.70.1.9 Description This attribute defines the parallel port pin out.
Parallel port dma support Name parallelPortDMASupport Object ID .1.3.6.1.4.1.674.10909.1.1000.70.1.13 Description This attribute defines if DMA is supported by the parallel port. Syntax DellBoolean Access Read only Serial port table Name serialPortTable Object ID .1.3.6.1.4.1.674.10909.1.1000.80 Description This object defines the Serial Port Table. Syntax SEQUENCE OF SerialPortTableEntry Access Not accessible Serial port table entry Name serialPortTableEntry Object ID .1.3.6.1.4.1.
Syntax DellObjectRange Access Read only Serial port status Name serialPortStatus Object ID .1.3.6.1.4.1.674.10909.1.1000.80.1.5 Description This attribute defines the status of the serial port. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only Serial port connector type Name serialPortConnectorType Object ID .1.3.6.1.4.1.674.10909.1.1000.80.1.7 Description This attribute defines the connector type of the serial port.
Serial port maximum speed Name serialPortMaximumSpeed Object ID .1.3.6.1.4.1.674.10909.1.1000.80.1.9 Description This attribute defines the maximum speed the serial port can support in bits per second. Zero indicates maximum speed is unknown. Syntax DellUnsigned32BitRange Access Read only Serial port capabilities unique Name serialPortCapabilitiesUnique Object ID .1.3.6.1.4.1.674.10909.1.1000.80.1.10 Description This attribute defines the mode capabilities of the serial port.
USB port table Name uSBPortTable Object ID .1.3.6.1.4.1.674.10909.1.1000.90 Description This object defines the Universal Serial Bus (USB) Port Table. Syntax SEQUENCE OF USBPortTableEntry Access Not accessible USB port table entry Name uSBPortTableEntry Object ID .1.3.6.1.4.1.674.10909.1.1000.90.1 Description This object defines the USB Port Table Entry. Syntax USBPortTableEntry Access Not accessible USB port chassis index Name uSBPortchassisIndex Object ID .1.3.6.1.4.1.674.10909.1.
nonCritical(4), critical(5), nonRecoverable(6) } Access Read only USB port connector type Name uSBPortConnectorType Object ID .1.3.6.1.4.1.674.10909.1.1000.90.1.7 Description This attribute defines the connector type of the USB port. Syntax INTEGER {connectorPortTypeIsOther(1), connectorPortTypeIsUnknown(2), connectorPortTypeIsUSB(3) } Access Read only USB port name Name uSBPortName Object ID .1.3.6.1.4.1.674.10909.1.1000.90.1.8 Description This attribute defines the USB port name.
portConnectorTypeIsHPHIL(19), portConnectorTypeIsAccessBussUSB(20), portConnectorTypeISSASCSI(21), portConnectorTypeIsCirdin8Male(22), portConnectorTypeIsCirdin8Female(23), portConnectorTypeIsIDE(24), portConnectorTypeIsFloppy(25), portConnectorTypeIsDIN9Pin(26), portConnectorTypeIsDIN25Pin(27), portConnectorTypeIsDIN50Pin(28), portConnectorTypeIsDIN68Pin(29), portConnectorTypeIsCDROMLineOut(30), portConnectorTypeIsMiniCentronics14(31) , portConnectorTypeIsMiniCentronics26(32) , portConnectorTypeIsMiniJack(
9 Device group The Device Group provides information about different types of pointing, keyboard, processor, cache, memory, and peripheral component interconnect (PCI) devices. Variables in this group cover information about type, settings, configuration, manufacturer, address or location, and if applicable, the speed of the device. Name deviceGroup Object ID .1.3.6.1.4.1.674.10909.1.
Processor device chassis index Name processorDevicechassisIndex Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.1 Description This attribute defines the index (one-based) of the associated chassis. Syntax DellObjectRange Access Read only Memory device chassis index Name memoryDevicechassisIndex Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.1 Description This attribute defines the index (one-based) of the associated chassis.
Processor port index reference Name processorPortIndexReference Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.6 Description This attribute defines the index (one-based) of the associated processor port in the same chassis. Syntax DellObjectRange Access Read only Processor device type Name processorDeviceType Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.7 Description This attribute defines the type of the processor device.
idle(6) } Access Read only Processor device family Name processorDeviceFamily Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.10 Description This attribute defines the processor family.
deviceFamilyIsAlpha21164a(53), deviceFamilyIsAlpha21264(54), deviceFamilyIsAlpha21364(55), deviceFamilyIsAMDTurionIIUltraDualMobil eM(56), deviceFamilyIsAMDTurionIIDualMobileM(57 ), deviceFamilyIsAMDAthlonIIDualMobileM(58 ), deviceFamilyIsAMDOpteron6100(59), deviceFamilyIsAMDOpteron4100(60), deviceFamilyIsAMDOpteron6200(61), deviceFamilyIsAMDOpteron4200(62), deviceFamilyIsMIPS(64), deviceFamilyIsMIPSR4000(65), deviceFamilyIsMIPSR4200(66), deviceFamilyIsMIPSR4400(67), deviceFamilyIsMIPSR4600(68), deviceFamil
deviceFamilyIsPA-RISC7300LC(147), deviceFamilyIsPA-RISC7200(148), deviceFamilyIsPA-RISC7100LC(149), deviceFamilyIsPA-RISC7100(150), deviceFamilyIsV30(160), deviceFamilyIsQuadCoreIntelXeon3200(161 ), deviceFamilyIsDualCoreIntelXeon3000(162 ), deviceFamilyIsQuadCoreIntelXeon5300(163 ), deviceFamilyIsDualCoreIntelXeon5100(164 ), deviceFamilyIsDualCoreIntelXeon5000(165 ), deviceFamilyIsDualCoreIntelXeonLV(166), deviceFamilyIsDualCoreIntelXeonULV(167) , deviceFamilyIsDualCoreIntelXeon7100(168 ), deviceFamilyIsQu
deviceFamilyIsIntelCorei5(205), deviceFamilyIsIntelCorei3(206), deviceFamilyIsVIAC7-M(210), deviceFamilyIsVIAC7-D(211), deviceFamilyIsVIAC7(212), deviceFamilyIsVIAEden(213), deviceFamilyIsMultiCoreIntelXeon(214), deviceFamilyIsDualCoreIntelXeon3xxx(215 ), deviceFamilyIsQuadCoreIntelXeon3xxx(216 ), deviceFamilyIsVIANano(217), deviceFamilyIsDualCoreIntelXeon5xxx(218 ), deviceFamilyIsQuadCoreIntelXeon5xxx(219 ), deviceFamilyIsDualCoreIntelXeon7xxx(221 ), deviceFamilyIsQuadCoreIntelXeon7xxx(222 ), deviceFamilyI
Processor device current speed Name processorDeviceCurrentSpeed Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.12 Description This attribute defines the current speed of the processor in MHz. Zero indicates the current speed is unknown. Syntax DellUnsigned32BitRange Access Read only Processor device external clock speed Name processorDeviceExternalClockSpeed Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.13 Description This attribute defines the external clock speed for the processor in MHz.
Description This attribute defines the number of processor cores enabled for the processor. Syntax DellUnsigned32BitRange Access Read only Processor device model name Name processorDeviceModelName Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.24 Description This attribute defines the processor model. Syntax DellString Access Read only Processor device stepping name Name processorDeviceSteppingName Object ID .1.3.6.1.4.1.674.10909.1.1100.30.1.
Memory device status Name memoryDeviceStatus Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.5 Description This attribute defines the memory device status. Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only Memory device index Name memoryDeviceIndex Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.2 Description This attribute defines the index (one-based) of the memory device.
deviceTypeIsDDR3(24), deviceTypeIsFBD2(25) } Access Read only Memory device location name Name memoryDeviceLocationName Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.8 Description This attribute defines the location of the memory device. Syntax DellString Access Read only Memory device type details Name memoryDeviceTypeDetails Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.11 Description This attribute defines the detailed type of the memory device.
deviceFormFactorIsDIP(6), deviceFormFactorIsZIP(7), deviceFormFactorIsAProprietaryCard(8), deviceFormFactorIsDIMM(9), deviceFormFactorIsTSOP(10), deviceFormFactorIsARowOfChips(11), deviceFormFactorIsRIMM(12), deviceFormFactorIsSODIMM(13), deviceFormFactorIsSRIMM(14), deviceFormFactorIsFBDIMM(15) } Access Read only Memory device set Name memoryDeviceSet Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.13 Description This attribute defines if the memory device is a part of a set.
Memory device total bus width Name memoryDeviceTotalBusWidth Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.16 Description This attribute defines the total number bits, including ECC, used by the memory device. 2,147,483,647 indicates an unknown number of bits. Syntax DellUnsigned32BitRange Access Read only Memory device total data bus width Name memoryDeviceTotalDataBusWidth Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.
Memory device serial number name Name memoryDeviceSerialNumberName Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.23 Description This attribute defines the serial number of the memory device. Syntax DellString Access Read only Memory device asset tag name Name memoryDeviceAssetTagName Object ID .1.3.6.1.4.1.674.10909.1.1100.50.1.24 Description This attribute defines the asset tag of the memory device.
Pci device table Name pCIDeviceTable Object ID .1.3.6.1.4.1.674.10909.1.1100.80 Description This object defines the PCI Device Table. Syntax SEQUENCE OF PCIDeviceTableEntry Access Not accessible Pci device table entry Name pCIDeviceTableEntry Object ID .1.3.6.1.4.1.674.10909.1.1100.80.1 Description This object defines the PCI Device Table Entry. Syntax PCIDeviceTableEntry Access Not accessible Pci device chassis index Name pCIDevicechassisIndex Object ID .1.3.6.1.4.1.674.10909.1.1100.
Syntax INTEGER {other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6) } Access Read only Pci device data bus width Name pCIDeviceDataBusWidth Object ID .1.3.6.1.4.1.674.10909.1.1100.80.1.7 Description This attribute defines the width of the data bus of the PCI device. Syntax DellUnsigned32BitRange Access Read only Pci device manufacturer name Name pCIDeviceManufacturerName Object ID .1.3.6.1.4.1.674.10909.1.1100.80.1.
Network device table Name networkDeviceTable Object ID .1.3.6.1.4.1.674.10909.1.1100.90 Description This object defines the Network Device Table. Syntax SEQUENCE OF NetworkDeviceTableEntry Access Not accessible Network device table entry Name networkDeviceTableEntry Object ID .1.3.6.1.4.1.674.10909.1.1100.90.1 Description This object defines the Network Device Table Entry.
Syntax INTEGER {connected(1), disconnected(2), driverBad(3), driverDisabled(4), hardwareInitalizing(10), hardwareResetting(11), hardwareClosing(12), hardwareNotReady(13) } Access Read only Network device description name Name networkDeviceDescriptionName Object ID .1.3.6.1.4.1.674.10909.1.1100.90.1.5 Description This attribute defines the description of the network device. Syntax DellString Access Read only Network device vendor name Name networkDeviceVendorName Object ID .1.3.6.1.4.1.674.
Syntax DellString Access Read only Network device driver version name Name networkDeviceDriverVersionName Object ID .1.3.6.1.4.1.674.10909.1.1100.90.1.10 Description This attribute defines the driver version for the network device. Syntax DellString Access Read only Network device IP address Name networkDeviceIPAddress Object ID .1.3.6.1.4.1.674.10909.1.1100.90.1.11 Description This attribute defines the IP address of the network device.
Network device DHCP server IP address Name networkDeviceDHCPServerIPAddress Object ID .1.3.6.1.4.1.674.10909.1.1100.90.1.14 Description This attribute defines the IP address of the DHCP server that was used to obtain the IP address of the network device if DHCP is used to configure the network device. Syntax IpAddress Access Read only Network device current MAC address Name networkDeviceCurrentMACAddress Object ID .1.3.6.1.4.1.674.10909.1.1100.90.1.
10 Slot group The Slot Group provides information about the types of slots that your system supports. This management information base (MIB) group also provides information about the voltages, capabilities, states, and settings that are possible for these slots. Name slotGroup Object ID .1.3.6.1.4.1.674.10909.1.1200 System slot table Name systemSlotTable Object ID .1.3.6.1.4.1.674.10909.1.1200.10 Description This object defines the system slot table.
System slot index Name systemSlotIndex Object ID .1.3.6.1.4.1.674.10909.1.1200.10.1.2 Description This attribute defines the index (one-based) of the system slot. Syntax DellObjectRange Access Read only System slot state capabilities unique Name systemSlotStateCapabilitiesUnique Object ID .1.3.6.1.4.1.674.10909.1.1200.10.1.3 Description This attribute defines the state capabilities of the system slot.
Description This attribute defines the state settings of the system slot.
Syntax INTEGER {systemSlotUsageIsOther(1), systemSlotUsageIsUnknown(2), systemSlotUsageIsAvailable(3), systemSlotUsageIsInUse(4) } Access Read only System slot type Name systemSlotType Object ID .1.3.6.1.4.1.674.10909.1.1200.10.1.7 Description This attribute defines the type of the system slot.
System slot external slot name Name systemSlotSlotExternalSlotName Object ID .1.3.6.1.4.1.674.10909.1.1200.10.1.8 Description This attribute defines the name of the external connector name of the system slot. Syntax DellString Access Read only System slot length Name systemSlotLength Object ID .1.3.6.1.4.1.674.10909.1.1200.10.1.9 Description This attribute defines the length of the system slot.
Access Read only System slot hot-plug bus width Name systemSlotHotPlugBusWidth Object ID .1.3.6.1.4.1.674.10909.1.1200.10.1.12 Description This attribute defines the bus width of the hot plug system slot.
11 SNMP traps Dell Command | Monitor generates events that result in Simple Network Management Protocol (SNMP) traps or operating system event logs. This section describes the traps, also known as alerts, generated by Dell Command | Monitor. Dell Command | Monitor generates events in response to changes in the status of sensors and other monitored parameters.
Variables alertSystem, alertMessage, alertCurrentStatus, alertPreviousStatus, alertData Trap ID/Specifics 1205 Alert amperage probe warning Variable Name alertAmperageProbeWarning Description Amperage probe has detected a warning value. Variables alertSystem, alertMessage, alertCurrentStatus, alertPreviousStatus, alertData Trap ID/Specifics 1203 Alert chassis intrusion normal Variable Name alertChassisIntrusionNormal Description Chassis intrusion has returned to normal.
Alert cooling device nonrecoverable Variable Name alertCoolingDeviceNonRecoverable Description Cooling device sensor has detected a nonrecoverable value. Variables alertSystem, alertMessage, alertCurrentStatus, alertPreviousStatus, alertData Trap ID/Specifics 1105 Alert cooling device warning Variable Name alertCoolingDeviceWarning Description Cooling device sensor has detected a warning value.
Variables alertSystem, alertMessage, alertCurrentStatus, alertPreviousStatus, alertData Trap ID/Specifics 2038 Alert HDD smart failure Variable Name alertHDDSMARTFailure Description Firmware error encountered on the system — SMART alert detected on drive.
Alert number of processor increased Variable Name alertNumberOfProcessorIncreased Description Number of processors on the system has increased. Variables alertSystem, alertMessage, alertCurrentStatus, alertPreviousStatus, alertData Trap ID/Specifics 2035 Alert physical disk degraded Variable Name alertPhysicalDiskDegraded Description Particular physical disk has degraded.
Trap ID/Specifics 1812 Alert physical memory decreased Variable Name alertPhysicalMemoryDecreased Description Physical memory on the system has decreased. Variables alertSystem, alertMessage, alertCurrentStatus, alertPreviousStatus, alertData Trap ID/Specifics 2033 Alert physical memory increased Variable Name alertPhysicalMemoryIncreased Description Physical memory on the system has increased.
Variables alertSystem, alertMessage, alertCurrentStatus, alertPreviousStatus, alertData Trap ID/Specifics 1054 Alert temperature probe nonrecoverable Variable Name alertTemperatureProbeNonRecoverable Description Temperature probe has detected a nonrecoverable value.
Alert virtual disk offline Variable Name alertVirtualDiskOffline Description Particular virtual disk is offline. Variables alertSystem, alertMessage, alertCurrentStatus, alertPreviousStatus, alertData Trap ID/Specifications 1824 Alert virtual disk rebuilding Variable Name alertVirtualDiskRebuilding Description Particular virtual disk is rebuilding.
Trap ID/Specifics 1153 97
