Release Notes

Issue: Enumeration of DCIM_ElementCapabilities class results in error
Description: Enumeration of DCIM_ElementCapabilities class displays an error through WINRM
on a some platforms. NOTE: WMI studio and WBEMTest works fine.
Resolution: Use WMI studio and WBEMTest tool to enumerate this class.
Issue: dsm_sa_datamgr32 service stops responding while installing chipset driver
Description: This issue occurs only when Dell Command | Monitor is installed on some platforms
before installing the chipset driver.
Issue: dsm_sa_datamgr service stops responding when USB driver is enabled, disabled or
uninstalled.
Issue: Class DCIM_PhysicalDiskView enumerates only IDE disk drives for Intel controller.
Issue: The value of Link technology property in DCIM_EthernetPort class appears empty.
Description: If the value of any attribute is not in English, then that attribute field may appear
blank. For example, DCIM_EthernetPort_LinkTechnology. Dell Command | Monitor is not
localized and is an English language application; however, Dell Command | Monitor can be
installed on other OS language versions such as French, German, Spanish, Japanese, Korean,
Simplified Chinese, and Traditional Chinese of supported Windows operating systems.
Issue: Dell Command | Monitor allows enabling Secure Boot when Legacy Option ROM is enabled
and boot mode is UEFI; however, there is no negative impact due to this on the BIOS. This issue
will be addressed in the upcoming BIOS versions.
Issue: No appropriate message is displayed while upgrading or downgrading OMCI.
Description: Downgrading to OMCI 8.0.1 is successful without any message. Downgrading to
OMCI 8.1 or 8.1.1 is not allowed and a message is displayed that a prior version has already been
installed.