Dell Command | Monitor 9.1.
Version 9.1.1 Release Date: April 2016 Previous Version Dell Command | Monitor 9.1.1 The Dell Command | Monitor (formally known as OpenManage™ Client Instrumentation or OMCI) enables remote management application programs to access the client's system information, monitor the status, change the state, and shut it down remotely.
Windows 10 Pro (32 and 64 bit) Windows 10 Core (32 and 64 bit) Windows 8.1 Enterprise (32 and 64 bit) Windows 8.1 Pro (32 and 64 bit) Windows 8.
Support for generating numeric sensor temperature alerts when temperature goes from upper non-critical threshold to upper critical threshold and from upper critical threshold to upper non-critical threshold. Support for generatring repeatative chassis intrusion alerts using DCIM_AlertIndication class. Important Notes Simple Network Management Protocol (SNMP) Support: You can enable SNMP support while installing Dell Command | Monitor. The Management Information Base (MIB) file (10892.
Issue: Enumeration of DCIM_ElementCapabilities class results in error Description: Enumeration of DCIM_ElementCapabilities class displays an error through WINRM on a some platforms. NOTE: WMI studio and WBEMTest works fine. Resolution: Use WMI studio and WBEMTest tool to enumerate this class. Issue: dsm_sa_datamgr32 service stops responding while installing chipset driver Description: This issue occurs only when Dell Command | Monitor is installed on some platforms before installing the chipset driver.
Issue: Configuring OROM UI protection through Dell Command | Monitor results in the configuration of OROM keyboard access on the following Dell platforms : Latitude E6x30, E5x30 Dell Precision mobile M4700, M4500 Dell Precision workstation T1650 Optiplex 9010, 7010 Issue: When BIOS password is enabled on a system, you cannot set the attributes Upper and Lower NonCritical Threshold of the DCIM_NumericSensor class.
Issue: Setting the NonCritical threshold levels for fans is not supported. For the attribute SettableThreshold the NonCritical value can be set to Settable. Issue: For temperature probe, the Upper Critical Threshold level should be greater than 0. Issue: For most of the laptop or desktop platforms, where current reading and the Lower and Upper Critical values are not defined, the fan health status in the DCIM_NumericSensor class will be displayed as ‘Critical failure’.
Issue: While stopping the data manager service, an error message might be displayed saying the process cannot be stopped. But the service will be stopped. Issue: The monitoring and alerting status of VirtualDisk with LSI controllers is displayed as Degraded when the disk is rebuilding. Issue: The Controller Primary state attribute changes to Degraded and an alert will be generated when there is a change in physical or virtual drive in the LSI controllers.
Installation Instructions For information and procedure for installing Dell Command | Monitor, see the Dell Command | Monitor – Installation Guide, available at dell.com/dellclientcommandsuitemanuals. Installation and Configuration Notes Following an upgrade, it may be necessary to reboot the system for the installation to complete. To complete the upgrade, reboot the system./Reboot the system to complete the upgrage.
Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. 2. 3. 4. Go to support.dell.com. Select your support category.
