Release Notes

Issue 9: Configuring OROM UI Protection through DC | M results in the configuration of
OROM keyboard access on the following Dell platforms :
• Latitude E6x30,E5x30
•
Dell Precision Mobile M4700,M4500
•
Dell Precision Workstation T1650
•
Optiplex 9010,7010
Issue 10: When BIOS password is enabled on a system, we cannot set the attributes
Upper and Lower NonCritical Threshold of the DCIM_NumericSensor class.
Issue 11: There is no instance for DCIM_videohead class when the System Under Test
(SUT) connecting to High-Definition Multimedia Interface (HDMI) display
Resolution: Users can get this information from Win32_DisplayConfiguration class
under root\cimv2 namespace.
Issue 12: Peak Shift Start time accepts and sets the value greater than Peak Shift End
time. Also Peak Shift End time accepts and sets the values less than Peak Shift Start time.
Resolution: Users can use the DC | M script available in the TechCenter
(http://en.community.dell.com/techcenter/extras/m/mediagallery/20383332.aspx) to set
Peak Shift configuration. While viewing Intel RAID alerts using DCIM_LogEntry class,
severity is reported as Unknown instead of Warning when Virtual Disk health state is
changed to rebuilding.
Issue 13: If the fan is not working as indicated by Health Status and OperationalStatus
attribute, then the attribute Current Status will be empty.
Issue 14: Dynamic Detection of Virtual Disk and Power Supply Unit (PSU) state is not
supported.
Issue 15: No alerts are generated for PSU.