Reference Guide

Property Description
EnabledDefault
An enumerated value indicating an administrator's
default or startup configuration for the Enabled
State of an element.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• 5 = Not Applicable
• 6 = Enabled but Offline
• 7 = No Default
• 9 = Quiesce
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
By default, the element is Enabled (value = 2).
EnabledState
An integer enumeration that indicates the enabled
and disabled states of an element. It can also
indicate the transitions between these requested
states. For example, shutting down (value = 4) and
starting (value = 10) are transient states between
enabled and disabled.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Enabled — Indicates that the element is or
could be executing commands, processes any
queued commands, and queues new requests.
• 3 = Disabled — Indicates that the element will
not run commands and drops any new
requests.
• 4 = Shutting Down — Indicates that the
element is in the process of going to a Disabled
state.
• 5 = Not Applicable — Indicates that the
element does not support being enabled or
disabled.
• 6 = Enabled but Offline — Indicates that the
element may be completing commands, and
drops any new requests.
• 7 = In Test — Indicates that the element is in a
test state.
• 8 = Deferred — Indicates that the element may
be completing commands, but queues any new
requests.
• 9 = Quiesce — Indicates that the element is
enabled but in a restricted mode.
• 10 = Starting — Indicates that the element is in
the process of going to an Enabled state. New
requests are queued.
• 11..32767 = DMTF Reserved
88