Reference Guide

Property Description
InfoFormat
An enumerated integer that describes the format
and interpretation of the AccessInfo property.
Possible values are:
• 1 = Other
• 2 = Host Name
• 3 = IPv4 Address
• 4 = IPv6 Address
• 5 = IPX Address
• 6 = DECnet Address
• 7 = SNA Address
• 8 = Autonomous System Number
• 9 = MPLS Label
• 10 = IPv4 Subnet Address
• 11 = IPv6 Subnet Address
• 12 = IPv4 Address Range
• 13 = IPv6 Address Range
• 100 = Dial String
• 101 = Ethernet Address
• 102 = Token Ring Address
• 103 = ATM Address
• 104 = Frame Relay Address
• 200 = URL 201 = FQDN
• 202 = User FQDN
• 203 = DER ASN1 DN
• 204 = DER ASN1 GN
• 205 = Key ID .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
Name
The Name property uniquely identifies the
ServiceAccessPoint and provides an indication of
the functionality that is managed. This functionality
is described in more detail in the Description
property of the object.
RequestedState
An integer enumeration that indicates the last
requested or desired state for the element,
irrespective of the mechanism through which it
was requested. The actual state of the element is
represented by EnabledState. This property is
provided to compare the last requested and
current enabled or disabled states.
NOTE: When EnabledState is set to 5 (Not
Applicable), then this property has no
meaning. See the EnabledState property
description for explanations of the values in
the RequestedState enumeration.
79