Reference Guide

Property Description
• 14 = Ethernet
• 15 = TokenRing
• 16 = FDDI
• 17 = Infiniband
• 18 = Fibre Channel
• 19 = ISDN BRI Endpoint
• 20 = ISDN B Channel Endpoint
• 21 = ISDN D Channel Endpoint
• 22 = IPv4/v6
• 23 = BGP
• 24 = OSPF
• 25 = MPLS
• 26 = UDP
• 27 = TCP
RequestedState
An integer enumeration that indicates the last
requested or desired state for the element,
irrespective of the mechanism through which it
was requested. The actual state of the element is
represented by EnabledState. This property is
provided to compare the last requested and
current enabled or disabled states.
Possible values are:
• 0 = Unknown — Indicates the last requested
state for the element is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline — Indicates that the element has
been requested to transition to the Enabled but
Offline EnabledState.
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to performing a Shut
Down and then moving to an Enabled state.
• 11 = Reset — Indicates that the element is first
Disabled and then Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
NOTE: When EnabledState is set to 5 (Not
Applicable), then this property has no
meaning. See the EnabledState property
description for explanations of the values in
the RequestedState enumeration.
60