Reference Guide

Property Description
HorizontalResolution
The horizontal resolution in Pixels of the flat panel.
MaxQuiesceTime
The use of this property has been deprecated. When evaluating the
use of Quiesce, it was determined that this single property is not
adequate for describing when a device will automatically exit a
quiescent state. In fact, the most likely scenario for a device to exit a
quiescent state was determined to be based on the number of
outstanding requests queued rather than on a maximum time. This
decision will be re-evaluated and repositioned later. Deprecated
description: Maximum time, in milliseconds, that a Device can run in
a Quiesced state. The state is defined in its Availability and Additional
Availability properties, where Quiesced is conveyed by the value 21.
What occurs at the end of the time limit is device-specific. The
Device can unquiesce, can be offline, or can take other actions. A
value of 0 indicates that a Device can remain quiesced indefinitely.
ScanMode
The scan mode of a flat panel indicating either single (value = 2) or
dual scan 3.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Single Scan
• 3 = Dual Scan
SystemCreationClassName
The creation class name of the scoping system.
SystemName
The system name of the scoping system.
TransitioningToState
Indicates the target state to which the instance is transitioning.
Possible values are:
• 0 = Unknown
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change — Indicates that no transition is in progress.
• 6 = Offline
• 7 = Test
• 8 = Defer
• 9 = Quiesce
• 10 = Reboot
• 11 = Reset
• 12 = Not Applicable — Indicates that the implementation does not
support representing ongoing transitions.
A value other than 5 or 12 identifies the state to which the element is
in the process of transitioning.
VerticalResolution
Vertical resolution in Pixels of a flat panel.
55