Reference Guide

Property Description
contained in the Associated
PowerManagementService association.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
OperationalStatus replaces the Status property on
ManagedSystemElement to provide a consistent
approach to enumerations, to address
implementation needs for an array property, and to
provide a migration path from today's environment
to the future. This change was not made earlier
because it required the deprecated qualifier. Due
to the widespread use of the existing Status
property in management applications, it is
recommended that providers or instrumentation
provide both the Status and OperationalStatus
properties. Further, the first value of
OperationalStatus should contain the primary
status for the element. When instrumented, Status
(because it is single-valued) should also provide
the primary status of the element.
PhysicalSizeH
Horizontal screen size in cm.
PhysicalSizeV
Vertical screen size in cm.
PrimaryStatus
Provides a high-level status value, intended to align
with Red-Yellow-Green type representation of
status. It should be used with DetailedStatus to
provide high level and detailed health status of the
ManagedElement and its subcomponents.
PrimaryStatus consists of one of the following
values:
• 0 = Unknown — Indicates that the
implementation is in general capable of
returning this property, but is unable to do so
now
• 1 = OK — Indicates the ManagedElement is
functioning normally.
• 2 = Degraded — Indicates the ManagedElement
is functioning below normal.
• 3 = Error — Indicates the ManagedElement is in
an Error condition.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
ProductCode
Product code of this monitor.
RequestedState
An integer enumeration that indicates the last
requested or desired state for the element,
irrespective of the mechanism through which it
was requested. The actual state of the element is
represented by EnabledState. This property is
37