Reference Guide

Attribute Name Description
SATA Port 4
Enables or Disables Serial ATA channel 5.
Possible values are:
• Off
• Auto
SATA Port 5
Enables or Disables Serial ATA channel 6.
Possible values are:
• Off
• Auto
SATA Port 6
Enables or Disables Serial ATA channel 7.
Possible values are:
• Off
• Auto
SATA Port 7
Enables or Disables Serial ATA channel 8.
Possible values are:
• Off
• Auto
Secure Boot
The BIOS performs a Secure Boot authentication while attempting to
boot from a UEFI partition. It refers to this setting to decide on the
POST behavior.
Possible values are:
• Enable — When enabled, BIOS only performs Secure Boot and
boot in UEFI mode without loading the Compatibility Support
Model (CSM).
NOTE: You can disable secure boot only from the BIOS setup
screen.
Serial Communications
Sets the Serial Communication.
Possible values are:
• Off
• On without console redirection
• On with console redirection (COM1)
• On with console redirection (COM2)
• On with console redirection
Serial Port 1
This property defines the serial port 1 configuration.
Possible values are:
• Disable
330