Reference Guide

ManualsBrandsDell ManualsAnalyticsCommand | Monitor 9.0

Property Description

• 5 = Not Applicable — Indicates that the

element does not support being enabled or

disabled.

• 6 = Enabled but Offline — Indicates that the

element may be completing commands, and

drops any new requests.

• 7 = In Test — Indicates that the element is in a

test state.

• 8 = Deferred — Indicates that the element may

be completing commands, but queues any new

requests.

• 9 = Quiesce — Indicates that the element is

enabled but in a restricted mode.

• 10 = Starting — Indicates that the element is in

the process of going to an Enabled state. New

requests are queued.

• 11..32767 = DMTF Reserved

• 32768..65535 = Vendor Reserved

FrequencyH

This property is a horizontal synchronization signal

frequency in Hz as determined by the display.

FrequencyV

This property is a vertical synchronization signal

frequency in Hz as determined by the display.

HealthState

Indicates the current health of the element. This

attribute expresses the health of this element but

not necessarily that of its subcomponents.

Possible values are:

• 0 = Unknown — The implementation cannot

report on HealthState now. DMTF has reserved

the unused portion of the continuum for

additional HealthStates in the future.

• 5 = OK — The element is fully functional and is

operating within normal operational parameters

and without error.

• 10 = Degraded/Warning — The element is in

working order and all functionality is provided.

However, the element is not working to the

best of its abilities. For example, the element

may not be operating at optimal performance

or it may be reporting recoverable errors.

• 15 = Minor failure — All functionality is available

but some may be degraded.

• 20 = Major failure — The element is failing. It is

possible that some or all of the functionality of

this component is degraded or not working.

• 25 = Critical failure — The element is

nonfunctional and recovery may not be

possible.

• 30 = Non-recoverable error — The element has

failed, and recovery is not possible. All

functionality provided by this element has been

lost.