Reference Guide

Attribute Name Description
• 2 = Express Charge — Switches the primary battery to Express
Charge mode using the express charging algorithm
• 3 = AC Use — Recommended setting for users who primarily
operate the battery when it is plugged in
• 4 = Auto Charge — The battery places itself in a mode based on
periodic evaluation of customer usage to deliver the best balance
of capacity
• 5 = Custom Charge — The battery starts and stops charging
based on the user input
Primary Battery Custom Charge
Limit
Charges the battery based on the user input.
Possible values are:
• 1 = Primary Battery Custom Charge Start Limit — Is applicable to
the DCIM_BIOSService for setting the start limit for charging the
battery.
• 2 = Primary Battery Custom Charge Stop Limit — Is applicable to
the DCIM_BIOSService for setting the stop limit for charging the
battery.
Possible values for the Start and Stop limit are:
• Start limit = 50 — 95
• Stop limit = 55 — 100
• Granularity — Dead band in binary format. For example, if the
dead band is 5%, the stop charging value is 5% greater than the
start charging value, but is not allowed exceed 100.
Primary IDE Channel, Master
Device
Enables or Disables primary Parallel ATA master channel.
Possible values are:
• Off
• Auto
Primary IDE Channel, Slave
Device
Enables or Disables primary Parallel ATA slave channel.
Possible values are:
• Disable
• Enable
Prompt On Error
Enable/Disable the Prompt on Error.
Possible values are:
• Disable
• Enable
Rear Single USB
This feature will allow the users to electrically enable or disable the
Rear Single USB ports. If disabled, they are unusable in any OS.
Possible values are:
• Off
327