Reference Guide

Attribute Name Description
Hard-Disk Failover
Specifies which devices in the Hard-Disk Drive Sequence menu are
attempted in the boot sequence. When set to OFF, only the first
device in the list is attempted. When set to ON, all devices are
attempted in order, as listed in the Hard-Disk Drive Sequence.
Possible values are:
• Disable
• Enable
Hardware Prefetcher
Enable/Disable the CPU’s HW prefetcher.
Possible values are:
• Disable
• Enable
Hard Drive Free Fall Protection
Enable/Disable hard drive free fall protection.
Possible values are:
• Disable
• Enable
Hardware Prefetch Training on
Software Prefetch
Prevents hardware prefetcher from considering software prefetches
when detecting strides for prefetch requests./Hardware prefetcher
considers software prefetches when detecting strides for prefetch
requests.
Possible values are:
• Disable
• Enable
HDD Protection
If setting On, the HDD Protection OPROM will be loaded. If setting
Off, the HDD Protection OPROM will be not loaded.
Possible values are:
• Off
• On
HDD1 Fan Enable
Enables or disables checking errors on the fan controller FAN_HDD1.
If the fan controller detects a valid fan, it enables it automatically.
Possible values are:
• Disable
• Enable
HDD2 Fan Enable
Enables or disables checking errors on the fan controller FAN_HDD2.
If the fan controller detects a valid fan, it enables it automatically.
Possible values are:
• Disable
311