Reference Guide

Attribute Name Description
Possible values are:
• Disable
• Enable
Fan Control Override
Controls the speed of the fan. When enabled the fan runs at full
speed. When disabled, the fan controller uses the system
environmental data to set the fan at its optimal speed.
Possible values are:
• Disable
• Enable
Fan Speed
Sets the system fan speed.
Possible values are:
• Auto
• High
• Medium High
• Medium Low
• Low
Fault-Tolerant Memory
Configures the system to detect and correct the software errors in a
block of RAM. When enabled, the system detects and corrects the
software errors.
Possible values are:
• Disable
• Enable
Function Lock
Controls the behavior of the dual-function keys (<F1> — <F12>),
when <Fn> key is pressed.
Possible values are:
• Disable — If disabled, holding the <Fn> key enables the secondary
functions associated with the particular key.
• Enable — If enabled, holding the <Fn> key enables the labeled
functions of the keys (<F1> — <F12>).
Function Lock Mode
Controls the behavior of the dual-function keys (<F1> — <F12>),
when <Fn> key is pressed and when it is not.
Possible values are:
• Disable — Holding <Fn> key enables the secondary functions
associated with the particular key
• Enable — Without holding <Fn> key, the dual-function keys
behave as labeled.
Force PXE on Next Boot
Enables or disables the Force PXE on next boot in BIOS.
309