Reference Guide

Attribute Name Description
one of two things: either Chassis Intrusion is not supported by this
system, or Chassis Intrusion event reporting has been disabled by the
user. If the value is Detected, the user may set it to Not Detected to
enable the system to receive the next event and to stop generating
events for now.
Possible values are:
• Tripped
• Door open
• Door closed
• Trip reset
Clear System Event Log
Prevents or causes the system event log to be cleared in the next
boot.
Possible values are:
• Disable
• Enable
Cool and Quiet
Enables or Disables AMD Cool and Quiet processor feature.
Possible values are:
• Disable
• Enable
CPU Virtualization Technology
Enables or Disables CPU Virtualization.
Possible values are:
• Disable
• Enable
Deep Sleep Control Configures the system power mode when the system is in S4 and S5
state. If set to S5only, the system moves to the lowest-Power Off
mode only in S5 state. If set to S4 and S5 state, the system moves to
the lowest-Power Off mode in both S4 and S5 states. When the
system is in low-power mode, it turns off most of the power-
consuming circuitry, to meet the 1 W power limit. It disables PME,
USB power, etc.
Possible values are:
• S5 only
• S4 and S5
• Disable
Dell Reliable Memory
Technology
Configures the system to detect and correct the software errors in a
block of RAM. When enabled, the system detects and corrects the
software errors.
Possible values are:
• Disable
306