Reference Guide

Property Description
first colon to appear in InstanceID must appear between <OrgID> and
<LocalID> . <LocalID> is chosen by the business entity and should not
be reused to identify different underlying (real-world) elements. If the
above preferred algorithm is not used, the defining entity must assure
that the resulting InstanceID is not reused across any InstanceIDs
produced by this or other providers for the NameSpace of this
instance. For DMTF-defined instances, the preferred algorithm must
be used with the <OrgID> set to CIM.LocalOnly.
LocalOnly
This property shows if the events from this the event source should
be reported to the local indication consumer only or should be
reported to CIMOM as an indication. TRUE for reporting to local
consumer only, and FALSE for reporting as an indication.
MaxDisplayNotifications
The maximum number of indications of this type that will be sent to
the local display.
MaxNTEventLogNotifications
The maximum number of indications of this type that will be sent to
the local display.
Name
The label by which the Configuration object is known.
OtherAlertType
A string describing the Alert type - used when the Alert type property
is set to 1, Other State Change.
PollEnabled
This property shows if status-polling of the event source is enabled or
not. TRUE for enable, and FALSE for disabled.
PollingInterval
The polling interval for event source, in seconds.
ProbableCause
An enumerated value that describes the probable cause of the
situation which resulted in the AlertIndication.
Possible values are:
• 0 = Unknown
• 1 = Other
• 2 = Adapter/Card Error
• 3 = Application Subsystem Failure
• 4 = Bandwidth Reduced
• 5 = Connection Establishment Error
• 6 = Communications Protocol Error
• 7 = Communications Subsystem Failure
• 8 = Configuration/Customization Error
• 9 = Congestion
• 10 = Corrupt Data
• 11 = CPU Cycles Limit Exceeded
• 12 = Dataset/Modem Error
• 13 = Degraded Signal
• 14 = DTE-DCE Interface Error
• 15 = Enclosure Door Open
• 16 = Equipment Malfunction
243