Reference Guide

Property Description
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
VProCharacteristics
VProCharacteristics defines if VPro setup properties are supported.
Possible values are:
• 2 = CPUSupportsVTx — CPUSupportsVTx:Defines if the CPU
supports VT-x for vPro brand.
• 3 = MCHSupportForVTd — MCHSupportForVTd:Defines if the
MCH supports TXT for vPro brand.
• 4 = LTTXTCapability — LTTXTCapability:Defines CPU LT/TXT
capability for vPro brand.
• 5 = SupportsTPMOnBoard — SupportsTPMOnBoard:Defines if an
on board TPM is supported for vPro brand.
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
VTdState
Defines VT-d state for vPro brand.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
VTxEnabledState
Defines CPU VT-x state for vPro brand.
Possible values are:
• 2 = Enabled
• 3 = Disabled
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
DCIM_AlertIndicationSettingData
Property Description
AlertCategory
The identifying information of the entity (instance) for which this
Indication is generated. The property contains the path of an
instance, encoded as a string parameter — if the instance is modeled
in the CIM Schema. If not a CIM instance, the property contains some
identifying string that names the entity for which the Alert is
generated. The path or identifying string is formatted per the
AlertingElementFormat property.
AlertType
Primary classification of the Indication.
241