Reference Guide

Property Description
LockPresent
Boolean indicating whether the Frame is protected
with a lock.
Manufacturer
The name of the organization responsible for
producing the PhysicalElement. This organization
may be the entity from whom the Element is
purchased, but this is not necessarily true. The
latter information is contained in the Vendor
property of CIM_Product.
Model
The name by which the PhysicalElement is
generally known.
Name
The Name property defines the label by which the
object is known. When sub-classed, the Name
property can be overridden to be a Key property.
PackageType
Enumeration defining the type of the
PhysicalPackage.
Possible values are:
• 0 = Unknown — Indicates that the package
type is not known.
• 1 = Other — The package type does not
correspond to an existing enumerated value.
The value is specified using the
OtherPackageType property.
• 2 = Rack
• 3 = Chassis/Frame
• 4 = Cross Connect/Backplane
• 5 = Container/Frame Slot
• 6 = Power Supply
• 7 = Fan
• 8 = Sensor
• 9 = Module/Card
• 10 = Port/Connector
• 11 = Battery
• 12 = Processor
• 13 = Memory
• 14 = Power Source/Generator
• 15 = Storage Media Package (example, Disk or
Tape Drive)
• 16 = Blade
• 17 = Blade Expansion
NOTE: This enumeration expands on the list in
the Entity MIB (the attribute, entPhysicalClass).
The numeric values are consistent with CIM's
enum numbering guidelines, but are slightly
different than the MIB's values.
24