Reference Guide

Property Description
the well known level or provide context for the interpretation of the
other values of the PowerAllocationSettingData instance. A value of
MaxConAuxiliary indicates that the instance provides information
about the maximum power allocated or consumed by the
ManagedSystemElement as currently configured, while the
ManagedSystemElement is turned off and drawing auxiliary power.
Note that an alternate name for auxiliary power is trickle power.
Possible values are:
• 1 = Other
• 2 = MaxConAuxiliary
• 3 = MinWhenOn — Indicates the instance provides information
about the minimum value for power consumption for which a
configuration of the ManagedSystemElement exists such that
when it is powered on and operating in that configuration, the
power consumption of the ManagedSystemElement is guaranteed
not to exceed the specified amount.
• 4 = MaxAsConfigured — Indicates that the instance provides
information about the maximum power that may be allocated to
or consumed by the ManagedSystemElement as currently
configured while powered on. The actual power consumed may
be less.
• 5 = MaxIfAllHotPlug — Indicates that the instance provides
information about the maximum power allocated or consumed by
the ManagedSystemElement if all components that could be
added to the ManagedSystemElement without requiring a power
cycle of the ManagedSystemElement were added to the
ManagedSystemElement.
• 6 = MaxIfAllColdPlug — Indicates that the instance provides
information about the maximum power allocated or consumed by
the ManagedSystemElement if all components that could be
added to the ManagedSystemElement, including those that
require a power cycle of the ManagedSystemElement, were added
to the ManagedSystemElement.
• 7 = Allocated — Indicates that the instance provides information
about the current power allocated to the
ManagedSystemElement.
• 8 = MinWithoutDegradation — Indicates that the instance
provides information about the minimum power allocated or
consumed by the ManagedSystemElement without causing
performance degradation.
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
ResourceType
The type of resource this allocation setting represents.
Possible values are:
• 1 = Other
• 2 = Computer System
• 3 = Processor
• 4 = Memory
• 5 = IDE Controller
• 6 = Parallel SCSI HBA
• 7 = FC HBA
230