Reference Guide

Property Description
• 2 = Enabled — Indicates that the element is or could be executing
commands, will process any queued commands, and queues new
requests.
• 3 = Disabled — Indicates that the element will not execute
commands and will drop any new requests.
• 4 = Shutting Down — Indicates that the element is in the process
of going to a Disabled state.
• 5 = Not Applicable — Indicates the element does not support
being enabled or disabled.
• 6 = Enabled but Offline — Indicates that the element may be
completing commands, and will drop any new requests.
• 7 = In Test — Indicates that the element is in a test state.
• 8 = Deferred — Indicates that the element may be completing
commands, but will queue any new requests.
• 9 = Quiesce — Indicates that the element is enabled but in a
restricted mode.
• 10 = Starting — Indicates that the element is in the process of
going to an Enabled state. New requests are queued.
• 11..32767 = DMTF Reserved
• 32768..65535 = Vendor Reserved
HealthState
Indicates the current health of the element. This attribute expresses
the health of this element but not necessarily that of its
subcomponents.
DMTF has reserved the unused portion of the continuum for
additional HealthStates in the future.
Possible values are:
• 0 = Unknown — The implementation cannot report on
HealthState at this time.
• 5 = OK — The element is fully functional and is operating within
normal operational parameters and without error.
• 10 = Degraded/Warning — The element is in working order and all
functionality is provided. However, the element is not working to
the best of its abilities. For example, the element may not be
operating at optimal performance or it may be reporting
recoverable errors.
• 15 = Minor failure — All functionality is available but some may be
degraded.
• 20 = Major failure — The element is failing. It is possible that some
or all of the functionality of this component is degraded or not
working.
• 25 = Critical failure — The element is non-functional and recovery
may not be possible.
• 30 = Non-recoverable error — The element has completely failed,
and recovery is not possible. All functionality provided by this
element has been lost.
• .. = DMTF Reserved
InstanceID
Within the scope of the instantiating Namespace, InstanceID opaquely
and uniquely identifies an instance of this class. To ensure uniqueness
210