Reference Guide

Property Description
PrimaryStatus
Provides a high level status value, intended to align with Red-Yellow-
Green type representation of status. It should be used in conjunction
with DetailedStatus to provide high level and detailed health status of
the ManagedElement and its subcomponents.
Possible values are:
• 0 = Unknown — Indicates the implementation is in general
capable of returning this property, but is unable to do so at this
time.
• 1 = OK — Indicates the ManagedElement is functioning normally.
• 2 = Degraded — Indicates the ManagedElement is functioning
below normal.
• 3 = Error — Indicates the ManagedElement is in an Error
condition.
• .. = DMTF Reserved
• 0x8000.. = Vendor Reserved
RequestedState
An integer enumeration that indicates the last requested or desired
state for the element, irrespective of the mechanism through which it
was requested.
Possible values are:
• 0 = Unknown — Indicates the last requested state for the element
is unknown.
• 2 = Enabled
• 3 = Disabled
• 4 = Shut Down
• 5 = No Change
• 6 = Offline
• 7 = Test
• 8 = Deferred
• 9 = Quiesce
• 10 = Reboot — Refers to doing a Shut Down and then moving to
an Enabled state.
• 11 = Reset — Indicates that the element is first Disabled and then
Enabled.
• 12 = Not Applicable
• .. = DMTF Reserved
• 32768..65535 = Vendor Reserved
The actual state of the element is represented by EnabledState. This
property is provided to compare the last requested and current
enabled or disabled states. Note that when EnabledState is set to 5
(Not Applicable), then this property has no meaning. Refer to the
EnabledState property description for explanations of the values in
the RequestedState enumeration.
207